Whirlpool Washing Machine Error uL
⚡ Quick Answer: The Whirlpool washing machine uL error indicates an unbalanced load condition, typically occurring during the rinse or spin cycle. This error may caus... ✅ DIY Fixable
What Does Error uL Mean?
The Whirlpool washing machine uL error indicates an unbalanced load condition, typically occurring during the rinse or spin cycle. This error may cause excessive vibrations, drum banging, or the washer to stop mid-cycle until the load is rebalanced. Common causes include uneven distribution of laundry or worn suspension components. Properly redistributing the laundry and ensuring the washer is level can often resolve the issue.
Common Symptoms:
- Error appears during rinse/spin cycle
- Drum banging or heavy vibration
- Washer stops mid‑cycle until load is rebalanced
Possible Causes
- Unbalanced load distribution in the drum (high)
- Faulty or worn suspension components leading to imbalance (medium)
How to Fix Error uL
DIY Fix Redistribute and balance the laundry
- Pause the cycle when uL appears
- Open lid/door and evenly spread laundry around the drum
- Avoid washing a single large item alone by mixing smaller items
- Close lid/door and restart the cycle
DIY Fix Ensure washer is level and not overloaded
- Check that all four feet of the washer are firmly on the floor
- Adjust feet if the washer rocks
- Remove excess laundry if overloaded
Technician Only Inspect and replace suspension components
- Disconnect power to the washer
- Remove access panels to inspect suspension rods/shocks
- Replace worn/damaged suspension rods or shocks
- Reassemble machine and test with a balanced load
Parts needed: suspension rods or shock absorbers
- If the uL error persists after redistributing load and leveling the washer
- If mechanical shaking or banging continues suggesting suspension or structural issues
Next step
Choose the next step for uL
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Washer Suspension Rod Kit
Supports and stabilizes the washer tub during agitation and spin.
- Typical part-only price
- $35 - $120
- DIY difficulty
- Medium
- Estimated time
- 45-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Washer Shock Absorber
Dampens tub movement and vibration during high-speed spin cycles.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 400W |
|---|---|
| component | Control Board |
| resistance | N/A |
| part_number | W10617011 |
| voltage_rating | 120V AC |
Common Questions
What does uL error mean on whirlpool washing machine?
The uL error indicates an unbalanced load, causing vibrations or stopping the spin cycle.
Can I fix whirlpool washing machine uL error myself?
Yes, you can redistribute the laundry and ensure the washer is level to fix the uL error.
How much does it cost to fix uL error?
Repair costs for the uL error range from $50 to $200, depending on the model and service rates.
When should I call a technician for uL?
Call a technician if the uL error persists after rebalancing the load or if mechanical shaking continues.
Sources & References
- Whirlpool uL Error Code Explanation (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!