Whirlpool Washing Machine Error Sud

⚡ Quick Answer: Sud means whirlpool washing machine error Sud indicates that the machine has detected excessive suds during the wash cycle, which ... This is typically a DIY fix.

What Does Error Sud Mean?

whirlpool washing machine error Sud indicates that the machine has detected excessive suds during the wash cycle, which may cause the unit to stop or display unusual behavior.

Common Causes

  • Incorrect detergent type or amount (60% likelihood)
  • Clogged drain filter (30% likelihood)
  • Faulty pressure switch (10% likelihood)

Troubleshooting Steps

  1. Step 1: Check the detergent type and amount

    Ensure you are using a high-efficiency (HE) detergent and that you are not exceeding the recommended amount. Too much detergent can lead to excessive suds.

    Pro tip: Use the manufacturer's guidelines for detergent dosage.

  2. Step 2: Inspect and clean the drain filter

    Locate the drain filter, usually at the front bottom of the washer. Open the cover, place a bucket underneath, and remove the filter to clean it of any debris.

    Make sure to clean the filter regularly to prevent clogs.

  3. Step 3: Examine the pressure switch

    Check the pressure switch for any signs of damage or blockage. If it appears faulty, it may need to be replaced to ensure accurate sud detection.

    Consult the service manual for specific testing procedures.

  4. Step 4: Run a cleaning cycle

    After addressing the detergent and filter, run an empty cycle with a washer cleaner to help remove any residual suds and buildup.

    This can help reset the machine's sensors.

  5. Step 5: Reset the washing machine

    After completing the above steps, reset the machine by holding the Start and Cancel buttons for 3 seconds to clear the error code.

    This helps in refreshing the control board.

How to Reset

To reset the Sud error, hold the Start and Cancel buttons simultaneously for 3 seconds.

Technical Specifications

wattage N/A
component Pressure Switch
resistance N/A
part_number W10683603
voltage_rating 120V AC

Frequently Asked Questions

Can I use regular detergent for my Whirlpool washing machine?

No, you should only use high-efficiency (HE) detergent to prevent excessive suds.

How long does it take to fix the Sud error?

Typically, it takes about 30-45 minutes to troubleshoot and resolve the Sud error.

What causes the Sud error in my washing machine?

The Sud error is usually caused by using too much detergent or the wrong type, clogged filters, or a faulty pressure switch.

Should I call a technician if the Sud error persists?

Yes, if the error continues after troubleshooting, it may indicate a deeper issue that requires professional assistance.

When should I clean the drain filter of my washing machine?

You should clean the drain filter regularly, ideally every few months, or whenever you notice drainage issues.

User Comments (0)

Share your experience or solution below.

Be the first to comment!