Whirlpool Washing Machine Error PF
⚡ Quick Answer: The Whirlpool washing machine PF error code signifies a power failure during the wash cycle, causing the machine to stop unexpectedly. This interrupti... ✅ DIY Fixable
What Does Error PF Mean?
The Whirlpool washing machine PF error code signifies a power failure during the wash cycle, causing the machine to stop unexpectedly. This interruption is usually due to a loss of power from your household supply, leading to a paused or cancelled cycle until the error is cleared. If the power supply is stable yet the error persists, further investigation may be needed.
Common Symptoms:
- Washer stops mid‑cycle
- Error displayed after power interruption
- Cycle paused or cancelled until cleared
Possible Causes
- Power failure or interruption during washing cycle (high)
- Unstable or inadequate household voltage (medium)
How to Fix Error PF
DIY Fix Clear and resume cycle after power failure
- Press and hold START to attempt to resume the wash cycle where it left off
- If resume doesn’t work, press CANCEL/POWER to clear the code
- Restart the desired wash cycle from the beginning
Technician Only Check electrical supply and connections
- Measure outlet voltage to confirm stable proper voltage supply
- Inspect power cord, outlet, and circuit breaker for issues
- Verify wiring to the washer’s control board is secure
Parts needed: Multimeter, Electrical wiring/connectors
- If PF persists despite normal power supply restoration and restart attempts
- If multiple error codes appear along with PF indicating additional faults
Next step
Choose the next step for PF
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does PF error mean on whirlpool washing machine?
The PF error means a power failure occurred, interrupting the wash cycle.
Can I fix whirlpool washing machine PF error myself?
Yes, try pressing and holding START to resume or CANCEL to clear the error.
How much does it cost to fix PF error?
$50–$150 is the estimated cost for repairs related to the PF error.
When should I call a technician for PF?
Call a technician if the PF error persists after restoring power or if multiple error codes appear.
Sources & References
- PF Error Code — Whirlpool Product Help (official)
- PF Error Code — Whirlpool Product Help (Top Load) (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!