Whirlpool Washing Machine Error LOC

⚡ Quick Answer: LOC means Whirlpool Washing Machine error LOC indicates a malfunction in the door lock mechanism, preventing the door from unlocki... This is typically a DIY fix.

What Does Error LOC Mean?

Whirlpool Washing Machine error LOC indicates a malfunction in the door lock mechanism, preventing the door from unlocking and displaying a locked status.

Common Causes

  • Door Lock Assembly (50% likelihood)
  • Control Board Malfunction (30% likelihood)
  • Wiring Issues (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Door Lock Assembly

    Open the washer door and check the door lock assembly for any visible damage or debris that may be obstructing it. Ensure that the door closes properly.

    If the door does not close fully, it may not engage the lock mechanism.

  2. Step 2: Test the Door Lock with a Multimeter

    Disconnect the washer from power. Remove the door lock assembly and use a multimeter to check for continuity. If there is no continuity, the door lock needs replacement.

    Make sure to check the wiring harness for any signs of wear or damage.

  3. Step 3: Examine the Control Board

    Inspect the control board for any burnt components or loose connections. If any issues are found, the control board may need to be repaired or replaced.

    Take a photo of the wiring before disconnecting to ensure correct reconnection.

  4. Step 4: Reassemble and Test

    Reassemble the washer and reconnect it to power. Run a short cycle to check if the LOC error persists. If the error is cleared, the issue is resolved.

    If the error returns, further investigation into the control board or wiring may be necessary.

How to Reset

To reset the LOC error, unplug the washer for 1 minute, then plug it back in. If the error persists, further diagnosis is needed.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number W10619844
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the LOC error myself?

Yes, if you have basic tools and are comfortable with electrical components, you can troubleshoot the door lock assembly.

How long does it take to fix the LOC error?

The repair typically takes about 45-60 minutes, depending on the issue's complexity.

What causes the LOC error in my Whirlpool washer?

The LOC error is usually caused by a malfunctioning door lock assembly, control board issues, or wiring problems.

Should I replace the door lock assembly if I see the LOC error?

If the door lock assembly fails the continuity test, it should be replaced to resolve the LOC error.

When should I call a professional for the LOC error?

If you are unable to identify the issue after checking the door lock and control board, it may be time to consult a professional technician.

User Comments (0)

Share your experience or solution below.

Be the first to comment!