Whirlpool Washing Machine Error INT
⚡ Quick Answer: The Whirlpool Washing Machine INT error code signifies a communication failure with the control board, often due to a manually paused or canceled cycl... ✅ DIY Fixable
What Does Error INT Mean?
The Whirlpool Washing Machine INT error code signifies a communication failure with the control board, often due to a manually paused or canceled cycle. This can happen during a power interruption, leading to unresponsive controls or an erratic display. The washer may take 20-30 minutes to drain and spin down before the code clears. This behavior is part of normal operation rather than a fault, and users can typically resolve it by resetting the machine.
Common Symptoms:
- Washer display shows 'Int' instead of normal cycle status
- Washer appears paused mid-cycle
- Washer continues draining/spinning for 20–30 minutes before stopping
- Cycle does not immediately resume when Start pressed
Possible Causes
- Manual cycle pause or cancellation (high)
- External interruption (e.g., power outage or power fluctuation) (medium)
How to Fix Error INT
DIY Fix Clear 'Int' code and resume operation
- Press the Pause or Cancel button twice
- Press the Power/Start button once
- Wait up to 20–30 minutes for the washer to finish draining/spinning if the code persists
- If the code remains after shutdown has completed, unplug the washer for 1–5 minutes and reconnect power
Technician Only Verify proper operation after repeated 'Int' occurrences
- Check for intermittent power supply issues at outlet and household breaker
- Inspect door latch and interlock switch for proper operation
- Verify control board isn’t displaying other fault codes concurrently
- Test washer in diagnostics/service mode if available to confirm no underlying faults
Parts needed: Multimeter (for power testing), Door latch/interlock assembly (if faulty), Control board (if diagnostics indicate faults)
- The 'Int' code does not clear after multiple reset attempts
- Washer remains unresponsive or unusually long without completing drain/spin
- Other error codes appear concurrently with 'Int' or laundry remains water‑logged
Next step
Choose the next step for INT
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does INT error mean on Whirlpool Washing Machine?
INT error indicates a paused or canceled cycle due to a power interruption, resulting in an unresponsive display.
Can I fix Whirlpool Washing Machine INT error myself?
Yes, you can clear the INT code by pressing Pause or Cancel twice and then Power/Start once.
How much does it cost to fix INT error?
Repair costs range from $0 to $300, depending on parts and service time.
When should I call a technician for INT?
Call a technician if the INT code persists after resets or if the washer remains unresponsive.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!