Whirlpool Washing Machine Error F7E9

⚡ Quick Answer: F7E9 means Whirlpool Washing Machine error F7E9 indicates a communication failure between the control board and the motor control u... This is typically a DIY fix.

What Does Error F7E9 Mean?

Whirlpool Washing Machine error F7E9 indicates a communication failure between the control board and the motor control unit, often resulting in the display flashing or the machine failing to start.

Common Causes

  • Control Board (50% likelihood)
  • Motor Control Unit (30% likelihood)
  • Wiring Issues (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect Wiring Connections

    Check all wiring connections between the control board and the motor control unit for any signs of damage or loose connections. Ensure all connectors are securely attached.

    A loose connection is often the simplest fix.

  2. Step 2: Test the Control Board

    Using a multimeter, test the output voltage from the control board to the motor control unit. If the voltage is not within the expected range, the control board may need replacement.

    Refer to the service manual for voltage specifications.

  3. Step 3: Examine the Motor Control Unit

    Remove the motor control unit and inspect it for any visible damage or burnt components. If any issues are found, replacing the unit may be necessary.

    Take a photo of the wiring before disconnecting for easier reassembly.

  4. Step 4: Reset the Control Board

    After checking the components, reset the control board by disconnecting power for 10 minutes and then reconnecting it. This may clear temporary faults.

    This step is crucial before replacing parts.

How to Reset

To reset the control board, disconnect the washing machine from power for 10 minutes, then reconnect it to clear any temporary faults.

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number W10810403
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F7E9 error myself?

Yes, if you have basic electrical skills and tools, you can troubleshoot and potentially fix the issue.

How long will it take to repair the F7E9 error?

The repair can take 1-2 hours depending on the issue and your familiarity with appliance repairs.

What causes the F7E9 error in Whirlpool washers?

This error is typically caused by a failure in communication between the control board and the motor control unit.

Should I replace the control board if I see F7E9?

Not necessarily; first check the wiring and the motor control unit before deciding to replace the control board.

When should I call a professional for the F7E9 error?

If you're uncomfortable with electrical repairs or if the issue persists after your troubleshooting, it's best to call a professional.

User Comments (0)

Share your experience or solution below.

Be the first to comment!