Whirlpool Washing Machine Error F3E2

⚡ Quick Answer: The Whirlpool Washing Machine error F3E2 indicates a problem with the water temperature sensing system, often caused by incorrect inlet hose connectio... ✅ DIY Fixable

What Does Error F3E2 Mean?

The Whirlpool Washing Machine error F3E2 indicates a problem with the water temperature sensing system, often caused by incorrect inlet hose connections or a faulty temperature sensor. This error prevents the washer from starting or completing a wash cycle, usually accompanied by a flashing display. Users may also see this error immediately upon powering up the unit.

Common Symptoms:

  • Washer stops operation and displays F3E2
  • No wash cycle starts or interrupts mid‑cycle
  • Error appears immediately on power‑up for some models

Possible Causes

  • Incorrect water inlet hose connections (hot/cold reversed) (high)
  • Faulty or malfunctioning water temperature sensor (thermistor) (medium)
  • Loose or damaged wiring to the temperature sensor (medium)

How to Fix Error F3E2

DIY Fix Check water inlet hose connections

  1. Turn off the water supply to the washer.
  2. Verify that the hot water hose is connected to the hot inlet and the cold water hose is connected to the cold inlet.
  3. Reconnect hoses correctly if reversed.
  4. Open water valves fully and restart the washer.

DIY Fix Power cycle the washer

  1. Unplug the washer from the electrical outlet or switch off the circuit breaker.
  2. Wait approximately 5 minutes.
  3. Restore power and restart a wash cycle.

Technician Only Inspect and test water temperature sensor and wiring

  1. Disconnect power to the washer.
  2. Remove access panels to locate the water temperature sensor.
  3. Inspect wiring harness and connectors for damage or loose connections.
  4. Use a multimeter to test sensor resistance against specification for the model.
  5. Replace the sensor or repair wiring as needed.

Parts needed: Water temperature sensor (thermistor), Wiring harness/connectors

Technician Only Service control board if sensor tests normal but error persists

  1. Verify all sensor signals and inputs to the main control board.
  2. Confirm that the board is processing temperature data correctly.
  3. Replace the main control board if confirmed faulty.

Parts needed: Main control board

🛑 When to Call a Pro:
  • If F3E2 persists after verifying hose connections and basic reset
  • If you are uncomfortable performing electrical diagnostics
  • If multimeter tests do not isolate sensor issues

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number W10619844
voltage_rating 120V AC

Common Questions

What does F3E2 error mean on Whirlpool Washing Machine?

F3E2 indicates a water temperature sensing issue, preventing the washer from operating properly.

Can I fix Whirlpool Washing Machine F3E2 error myself?

Yes, you can check and correct water inlet hose connections and power cycle the washer.

How much does it cost to fix F3E2 error?

Estimated repair costs range from $40 to $150, depending on the issue.

When should I call a technician for F3E2?

Call a technician if the error persists after checking hose connections or if you are uncomfortable with electrical diagnostics.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!