Whirlpool Washing Machine Error F35

⚡ Quick Answer: F35 means Whirlpool Washing Machine error F35 indicates a failure in the pressure sensor, often accompanied by an unresponsive dis... This is typically a DIY fix.

What Does Error F35 Mean?

Whirlpool Washing Machine error F35 indicates a failure in the pressure sensor, often accompanied by an unresponsive display or failure to fill with water.

Common Causes

  • Pressure Sensor (50% likelihood)
  • Wiring Issues (30% likelihood)
  • Control Board Failure (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Pressure Sensor

    Locate the pressure sensor, usually found near the water inlet. Check for any visible damage or debris that may obstruct its function.

    Ensure the machine is empty before inspecting.

  2. Step 2: Test the Pressure Sensor

    Using a multimeter, measure the resistance across the sensor terminals. It should typically read between 1-10 ohms. If the reading is outside this range, the sensor may need replacement.

    Refer to the service manual for specific resistance values.

  3. Step 3: Check Wiring Connections

    Inspect the wiring harness connected to the pressure sensor for any signs of wear or loose connections. Reconnect or replace any damaged wires.

    Secure all connections firmly to prevent future issues.

  4. Step 4: Reset the Control Board

    If the sensor appears functional, reset the control board by unplugging the machine for 5 minutes, then plugging it back in.

    This can sometimes clear temporary errors.

  5. Step 5: Replace the Pressure Sensor

    If the error persists after testing and resetting, replace the pressure sensor. Ensure you have the correct part number for your model.

    Keep the old part for reference when purchasing a new one.

How to Reset

To reset the F35 error, unplug the washing machine for 5 minutes and then plug it back in.

Technical Specifications

wattage N/A
component Pressure Sensor
resistance 1-10 ohms
part_number W10648050
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F35 error myself?

Yes, if you have basic tools and follow the troubleshooting steps carefully.

How long does it take to fix the F35 error?

Typically, it takes about 45-60 minutes to diagnose and repair the issue.

What causes the F35 error in my Whirlpool washing machine?

The F35 error is usually caused by a malfunctioning pressure sensor or wiring issues.

Should I replace the pressure sensor immediately?

Only replace it if testing confirms it's faulty, as other issues may also cause the error.

When should I call a professional for the F35 error?

If you're unable to diagnose the issue after following the steps or if the control board seems faulty.

User Comments (0)

Share your experience or solution below.

Be the first to comment!