Whirlpool Washing Machine Error F29

⚡ Quick Answer: F29 means Whirlpool Washing Machine error F29 indicates a failure in the door lock mechanism, often resulting in the door not lock... This is typically a DIY fix.

What Does Error F29 Mean?

Whirlpool Washing Machine error F29 indicates a failure in the door lock mechanism, often resulting in the door not locking properly and the machine failing to start.

Common Causes

  • Door Lock Assembly (50% likelihood)
  • Wiring Issues (30% likelihood)
  • Control Board Malfunction (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Door Lock Mechanism

    Open the washer door and check the door lock for any visible damage or debris that may be preventing it from engaging properly.

    Ensure the door is fully closed during this inspection.

  2. Step 2: Test the Door Lock Assembly

    Using a multimeter, check the continuity of the door lock assembly. If there is no continuity, the assembly may need to be replaced.

    Refer to your model's wiring diagram for correct testing points.

  3. Step 3: Examine Wiring Connections

    Inspect the wiring harness connected to the door lock for any signs of wear or disconnection. Secure any loose connections.

    Look for frayed wires that may need repair.

  4. Step 4: Check the Control Board

    If the door lock assembly and wiring are intact, inspect the control board for any signs of damage or burnt components.

    This may require professional assistance if issues are found.

  5. Step 5: Replace the Door Lock Assembly

    If the door lock assembly is faulty, replace it with a new part. Follow the manufacturer's instructions for installation.

    Make sure to disconnect power before replacing parts.

How to Reset

To reset the F29 error, unplug the washing machine for 1 minute, then plug it back in and attempt to start a cycle again.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number W10619844
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F29 error myself?

Yes, if you have basic tools and follow the troubleshooting steps carefully.

How much does it cost to replace the door lock assembly?

The cost for a new door lock assembly typically ranges from $30 to $100, depending on the model.

What causes the F29 error to occur?

The F29 error is usually caused by a malfunctioning door lock assembly or issues with the wiring.

Should I call a technician if the error persists?

Yes, if you've replaced the door lock assembly and the error continues, a technician can diagnose control board issues.

When should I consider replacing my washing machine?

If multiple components fail consistently, it may be more cost-effective to replace the machine rather than repair it.

User Comments (0)

Share your experience or solution below.

Be the first to comment!