Whirlpool Washing Machine Error F28

⚡ Quick Answer: F28 means Whirlpool Washing Machine error F28 indicates a malfunction in the door lock mechanism, often resulting in the door not ... This is typically a DIY fix.

What Does Error F28 Mean?

Whirlpool Washing Machine error F28 indicates a malfunction in the door lock mechanism, often resulting in the door not locking properly or the machine failing to start.

Common Causes

  • Door Lock Assembly (50% likelihood)
  • Wiring Issues (30% likelihood)
  • Control Board Failure (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Door Lock Assembly

    Open the washing machine door and visually inspect the door lock assembly for any visible damage or wear. Ensure that it engages properly when the door is closed.

    If the lock appears damaged, it will need to be replaced.

  2. Step 2: Test the Door Lock with a Multimeter

    Disconnect the door lock assembly from the wiring harness. Use a multimeter to check for continuity across the terminals. If there is no continuity, the lock assembly is faulty and should be replaced.

    Ensure the multimeter is set to the correct resistance setting.

  3. Step 3: Check Wiring Connections

    Inspect the wiring harness connected to the door lock assembly for any signs of damage or loose connections. Repair or replace any damaged wires as necessary.

    Loose connections can often cause intermittent issues.

  4. Step 4: Examine the Control Board

    If the door lock assembly and wiring are intact, check the control board for any signs of burn marks or damage. If the control board is faulty, it will need to be replaced.

    This step may require professional assistance if you are not comfortable with electronics.

  5. Step 5: Reassemble and Test the Machine

    After making any necessary repairs, reassemble the washing machine and test it by running a short cycle to ensure the error code does not reappear.

    Monitor the door lock operation closely during the test.

How to Reset

To reset the error, unplug the washing machine for 1 minute, then plug it back in and attempt to start a cycle.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 10-30 ohms
part_number W10619844
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F28 error myself?

Yes, if you have basic tools and some experience with appliance repair, you can troubleshoot and replace the door lock assembly.

How much does it cost to replace the door lock assembly?

The cost of a door lock assembly typically ranges from $30 to $80, depending on the model of your washing machine.

What causes the F28 error in Whirlpool washers?

The F28 error is usually caused by a malfunctioning door lock assembly, wiring issues, or a faulty control board.

Should I call a professional for the F28 error?

If you are uncomfortable diagnosing electrical components or if the control board is suspected to be faulty, it’s best to call a professional.

When should I expect the F28 error to clear?

The error will clear once the door lock mechanism is repaired or replaced and the washing machine is reset.

User Comments (0)

Share your experience or solution below.

Be the first to comment!