Whirlpool Washing Machine Error F27
⚡ Quick Answer: The Whirlpool Washing Machine error code F27 indicates a malfunction related to the water level sensor, often caused by a faulty pressure switch or a ... ✅ DIY Fixable
What Does Error F27 Mean?
The Whirlpool Washing Machine error code F27 indicates a malfunction related to the water level sensor, often caused by a faulty pressure switch or a stuck water inlet valve. Symptoms include the washer stopping mid-cycle, perceiving the water level as too high, and possible failure to drain. This error may manifest after attempts to drain or clean the filter, and requires attention to ensure proper operation.
Common Symptoms:
- Washer stops mid‑cycle and displays F27
- Water level perceived as too high even if tub not visibly overflowing
- Possible failure to drain
- May appear after draining attempts or filter cleaning
Possible Causes
- Faulty or misreading water level pressure switch (medium)
- Water inlet valve stuck open or leaking (medium)
How to Fix Error F27
DIY Fix Initial checks and simple fixes
- Unplug the washer and wait a few minutes to reset control
- Check for kinks or blockages in the drain hose
- Clean out pump filter and drain hose if accessible
- Verify detergent use to avoid oversudsing (use correct HE amounts)
Technician Only Component inspection and replacement
- Test and inspect the water level pressure switch and its hose for clogs or damage
- Inspect and test the drain pump for proper operation; replace pump if faulty
- Check water inlet valve for leaks and replace if it remains open
- Confirm wiring connections at pressure switch and control board
Parts needed: Pressure switch, Drain pump, Water inlet valve, Pressure hose
- If water is leaking into tub when appliance is off (possible inlet valve leak)
- If error persists after basic cleaning and resets
- If internal access or electrical diagnostics are beyond comfort level
Next step
Choose the next step for F27
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Water Level Sensor |
| resistance | 1-10 kOhms |
| part_number | W10648035 |
| voltage_rating | 120V AC |
Common Questions
What does F27 error mean on Whirlpool Washing Machine?
The F27 error indicates a malfunction in the water level sensor, causing the washer to stop mid-cycle and perceive the water level as too high.
Can I fix Whirlpool Washing Machine F27 error myself?
Yes, you can perform initial checks like resetting the machine, checking for drain hose blockages, and cleaning the pump filter.
How much does it cost to fix F27 error?
Repair costs vary by part and labor but are typically moderate depending on the needed components.
When should I call a technician for F27?
Call a technician if there's water leaking into the tub when the appliance is off or if the error persists after basic fixes.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!