Whirlpool Washing Machine Error F24

⚡ Quick Answer: The Whirlpool Washing Machine error code F24 signals a failure in the door lock mechanism, often triggered by an overloaded load or excessive water fl... ✅ DIY Fixable

What Does Error F24 Mean?

The Whirlpool Washing Machine error code F24 signals a failure in the door lock mechanism, often triggered by an overloaded load or excessive water flow into the washer without a cycle running. This error may interrupt the wash cycle and prevent the machine from starting. If you encounter F24, it’s essential to check your load size and ensure the water supply is correctly managed to avoid further issues.

Common Symptoms:

  • Error appears during or immediately after water fill.
  • Washer interrupts cycle and displays F24.
  • Water may continue to flow into the washer without a cycle started.

Possible Causes

  • Overloaded wash load for the chosen program (high)
  • Excessive inlet water / water filling when no cycle is running (high)

How to Fix Error F24

DIY Fix Reduce Load Size or Rinse & Spin

  1. Cancel the current cycle.
  2. Remove some items from the washer to reduce load size.
  3. Select a Rinse & Spin program to complete the interrupted cycle.

DIY Fix Address Excess Inlet Water

  1. Turn off the water faucet supplying the washer.
  2. Touch and hold the Power button for at least 3 seconds to drain water.
  3. Wait until the drain phase completes (display shows End).
  4. Turn on the water faucet again.
  5. If water flows into the washer without a cycle running, turn off water and unplug washer.

Technician Only Inspect Inlet Valve and Control

  1. Verify inlet valve shuts off properly and does not allow water flow when idle.
  2. Check for stuck inlet valve or pressure issues.
  3. Evaluate pressure switch or control if excessive water fill persists.

Parts needed: Inlet water valve, Pressure switch, Control board

🛑 When to Call a Pro:
  • Water continues to fill into the washer even when no cycle is selected.
  • Error persists after reducing load and draining water.
  • Signs of water leakage or flooding risk.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number W10810403
voltage_rating 120V AC

Common Questions

What does F24 error mean on Whirlpool Washing Machine?

F24 error indicates a door lock failure due to an overloaded load or excessive water filling when no cycle is running.

Can I fix Whirlpool Washing Machine F24 error myself?

Yes, you can reduce the load size and select Rinse & Spin or turn off the water supply to address the F24 error.

How much does it cost to fix F24 error?

Repair costs for the F24 error typically range from $100 to $300, depending on parts and labor.

When should I call a technician for F24?

Call a technician if water continues to fill the washer without a cycle or if the error persists after troubleshooting.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!