Whirlpool Washing Machine Error F23

⚡ Quick Answer: F23 means Whirlpool Washing Machine error F23 indicates a failure in the door lock mechanism, often accompanied by a flashing disp... This is typically a DIY fix.

What Does Error F23 Mean?

Whirlpool Washing Machine error F23 indicates a failure in the door lock mechanism, often accompanied by a flashing display and the machine being unable to start.

Common Causes

  • Door Lock Assembly (60% likelihood)
  • Wiring Issues (30% likelihood)
  • Control Board Malfunction (10% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Door Lock Assembly

    Open the washer door and check the door lock assembly for any visible damage or debris. Ensure it is properly aligned and not obstructed.

    If the assembly is jammed, gently clean it out.

  2. Step 2: Test the Door Lock with a Multimeter

    Disconnect the washer from power. Use a multimeter to test the door lock assembly for continuity. If there is no continuity, the part needs replacement.

    Ensure you are testing the correct terminals.

  3. Step 3: Check Wiring Connections

    Inspect the wiring connected to the door lock assembly for any signs of wear or disconnection. Reconnect or replace any damaged wires.

    Secure all connections tightly.

  4. Step 4: Examine the Control Board

    If the door lock assembly and wiring are intact, inspect the control board for any visible damage or burnt components. If necessary, replace the control board.

    This step may require professional assistance.

How to Reset

To reset the F23 error, unplug the washing machine for 1 minute, then plug it back in and attempt to start a cycle again.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number W10810403
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F23 error myself?

Yes, if you have basic tools and follow the troubleshooting steps, you can often resolve the F23 error.

How much does it cost to replace a door lock assembly?

The cost for a new door lock assembly typically ranges from $30 to $100, depending on the model.

What causes the F23 error in Whirlpool washers?

The F23 error is usually caused by a faulty door lock assembly or issues with wiring and the control board.

Should I call a professional for the F23 error?

If you are uncomfortable with electrical components or if the issue persists after your repairs, it’s best to consult a professional.

When should I replace the door lock assembly?

If testing shows no continuity or the assembly is visibly damaged, it should be replaced to resolve the F23 error.

User Comments (0)

Share your experience or solution below.

Be the first to comment!