Whirlpool Washing Machine Error F22

⚡ Quick Answer: F22 means Whirlpool Washing Machine error F22 indicates a failure in the door lock mechanism, often accompanied by the door not lo... This is typically a DIY fix.

What Does Error F22 Mean?

Whirlpool Washing Machine error F22 indicates a failure in the door lock mechanism, often accompanied by the door not locking properly and the machine failing to start.

Common Causes

  • Door Lock Assembly (50% likelihood)
  • Wiring Issues (30% likelihood)
  • Control Board Malfunction (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Door Lock Assembly

    Open the washer door and check the door lock assembly for any visible damage or obstructions. Ensure that the latch engages properly when the door is closed.

    Look for signs of wear or debris that may prevent locking.

  2. Step 2: Test the Door Lock with a Multimeter

    Disconnect the washer from power. Use a multimeter to test the continuity of the door lock assembly. If there is no continuity, the lock needs replacement.

    Make sure to check the wiring connections as well.

  3. Step 3: Check Wiring Connections

    Inspect the wiring harness connected to the door lock for any loose or damaged wires. Repair or replace any faulty connections.

    Secure all connections before testing the machine.

  4. Step 4: Replace the Door Lock Assembly

    If the door lock assembly is defective, remove the screws securing it and replace it with a new one. Reassemble the door and test the machine.

    Ensure the new part is compatible with your model.

  5. Step 5: Run a Diagnostic Test

    After repairs, run a diagnostic test cycle to ensure the error code has cleared and the machine operates correctly.

    Refer to the user manual for specific diagnostic instructions.

How to Reset

To reset the F22 error, unplug the washer for 1 minute, then plug it back in and attempt to start a cycle again.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 10-20 ohms
part_number W10810403
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the door lock assembly myself?

Yes, if you have basic tools and follow the steps carefully, you can replace it yourself.

How much does it cost to fix error F22?

The cost varies; a new door lock assembly typically ranges from $20 to $50, plus any additional tools if needed.

What causes the door lock mechanism to fail?

Common causes include wear and tear, foreign objects obstructing the lock, or electrical issues.

Should I call a technician if the error persists?

If you've replaced the door lock and checked wiring but the error remains, it may be time to consult a professional.

When should I expect to see the error code again?

If the door lock assembly is faulty or wiring issues are unresolved, the error may reappear immediately after attempting to start the washer.

User Comments (0)

Share your experience or solution below.

Be the first to comment!