Whirlpool Washing Machine Error F17

⚡ Quick Answer: F17 means Whirlpool Washing Machine error F17 indicates a problem with the water inlet valve, often resulting in the machine faili... This is typically a DIY fix.

What Does Error F17 Mean?

Whirlpool Washing Machine error F17 indicates a problem with the water inlet valve, often resulting in the machine failing to fill with water.

Common Causes

  • Water Inlet Valve (60% likelihood)
  • Faulty Pressure Switch (30% likelihood)
  • Kinked Water Supply Hose (10% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Water Inlet Valve

    Check the water inlet valve for clogs or debris. Disconnect the hoses and clean the screens if necessary.

    Ensure the water supply is turned off before disconnecting hoses.

  2. Step 2: Test the Water Inlet Valve

    Using a multimeter, check the resistance of the water inlet valve. It should read between 1,000-2,000 ohms. If it reads infinite, replace the valve.

    If the valve is faulty, it will need to be replaced.

  3. Step 3: Examine the Pressure Switch

    Check the pressure switch for proper operation. Inspect the hose connected to it for blockages or damage.

    A malfunctioning pressure switch may need to be replaced.

  4. Step 4: Check the Water Supply Hose

    Inspect the water supply hose for kinks or blockages. Ensure it is securely connected to both the machine and the water source.

    Replace any damaged hoses.

  5. Step 5: Run a Diagnostic Test

    After addressing any issues, run a diagnostic test cycle to see if the error persists. Monitor the water filling process.

    This will help confirm if the issue is resolved.

How to Reset

To reset the F17 error, unplug the machine for 1 minute, then plug it back in and run a diagnostic cycle.

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 1,000-2,000 ohms
part_number W10648038
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F17 error myself?

Yes, if you have basic tools and are comfortable working with appliance components.

How long does it take to fix the F17 error?

Typically, it takes about 45-60 minutes to diagnose and repair the issue.

What causes the F17 error in my Whirlpool washer?

The F17 error is usually caused by a malfunctioning water inlet valve or a blockage in the water supply.

Should I call a professional for the F17 error?

If you're not comfortable troubleshooting electrical components, it's best to call a technician.

What happens if I ignore the F17 error?

Ignoring the error may lead to further damage to the washing machine or prevent it from functioning properly.

User Comments (0)

Share your experience or solution below.

Be the first to comment!