Whirlpool Washing Machine Error F11

⚡ Quick Answer: The Whirlpool Washing Machine error code F11 signals a communication failure between the Central Control Unit (CCU) and the Motor Control Unit (MCU). ... ✅ DIY Fixable

What Does Error F11 Mean?

The Whirlpool Washing Machine error code F11 signals a communication failure between the Central Control Unit (CCU) and the Motor Control Unit (MCU). This issue may prevent the washer from starting or cause it to stop mid-cycle. Common symptoms include the machine displaying the F11 code at the start of a cycle, intermittent operation, or random resets prior to the error. Inspecting the wiring and connections or replacing faulty control boards may resolve the issue.

Common Symptoms:

  • Washer displays F11 during or at start of cycle.
  • Washer stops mid‑cycle or fails to start.
  • Intermittent operation or random resets reported before error.

Possible Causes

  • Loose, damaged, or corroded wiring/connection between CCU and MCU (medium)
  • Faulty CCU or MCU boards (medium)

How to Fix Error F11

DIY Fix Power cycle the washer

  1. Turn off and unplug the washing machine from the power source.
  2. Wait 5–10 minutes to allow stored charge in boards to dissipate.
  3. Plug the washer back in and restart a cycle to check if the error persists.

Technician Only Inspect and secure wiring harness between CCU and MCU

  1. Disconnect power to the washer.
  2. Remove access panels to locate CCU and MCU boards.
  3. Inspect the wire harness between CCU and MCU for loose connectors, corrosion, or damage.
  4. Reseat connectors and replace any damaged sections of wiring.
  5. Reassemble and test the washer.

Parts needed: Wire harness between CCU and MCU, Connectors

Technician Only Replace faulty control board (CCU or MCU)

  1. Verify with diagnostic tools that the CCU or MCU is malfunctioning after wiring checks.
  2. Order correct replacement board for the model.
  3. Power off and remove the old control board.
  4. Install the new board, reconnecting all wiring harnesses correctly.
  5. Reassemble panels and test operation.

Parts needed: Main Control Unit (CCU), Motor Control Unit (MCU)

🛑 When to Call a Pro:
  • If the error code persists after basic power cycling and wiring checks.
  • If control boards show visible damage (burn marks, corrosion) or are suspected faulty.
  • If you are not comfortable working with internal electrical components.

Technical Specifications

wattage 200W
component Control Board
resistance 10-20 ohms
part_number W10675028
voltage_rating 120V AC

Common Questions

What does F11 error mean on Whirlpool Washing Machine?

F11 indicates a communication failure between the Central Control Unit and the Motor Control Unit, affecting the machine's operation.

Can I fix Whirlpool Washing Machine F11 error myself?

Yes, you can try power cycling the washer or checking wiring connections to see if the error resolves.

How much does it cost to fix F11 error?

Repair costs for the F11 error can range from $20 to $100 for parts, depending on the wiring needs.

When should I call a technician for F11?

Call a technician if the error persists after DIY fixes, or if you notice visible damage to control boards.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!