Whirlpool Washing Machine Error F09

⚡ Quick Answer: F09 means Whirlpool Washing Machine error F09 indicates a drain pump failure, often accompanied by unusual noises during the drain... This is typically a DIY fix.

What Does Error F09 Mean?

Whirlpool Washing Machine error F09 indicates a drain pump failure, often accompanied by unusual noises during the drain cycle and the machine pausing mid-cycle.

Common Causes

  • Drain Pump (60% likelihood)
  • Blocked Drain Hose (30% likelihood)
  • Control Board Issue (10% likelihood)

Troubleshooting Steps

  1. Step 1: Check the Drain Filter

    Remove the drain filter cover and inspect for debris or foreign objects that may block the pump.

    Keep a bucket handy to catch any water.

  2. Step 2: Inspect the Drain Hose

    Examine the drain hose for kinks or clogs. Ensure it is properly connected and not submerged in water.

    Clear any obstructions found.

  3. Step 3: Test the Drain Pump

    Using a multimeter, check the resistance of the drain pump. It should read between 10-30 ohms. If not, replace the pump.

    Ensure the washer is unplugged during testing.

  4. Step 4: Check the Control Board

    Inspect the control board for any visible damage or burnt components. If necessary, consult a professional for replacement.

    This step may require advanced skills.

  5. Step 5: Reassemble and Test

    Reassemble all parts and run a test cycle to ensure the error code does not reappear.

    Monitor for any unusual sounds during the cycle.

How to Reset

To reset the F09 error, unplug the washing machine for 1 minute and then plug it back in. Run a short cycle to check if the error persists.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number W10605459
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F09 error myself?

Yes, if you have basic tools and follow the troubleshooting steps.

How much time will it take to resolve the F09 error?

Typically, it takes about 45-60 minutes to diagnose and fix the issue.

What causes the Whirlpool F09 error?

It is primarily caused by a failure in the drain pump or blockages in the drain system.

Should I replace the drain pump immediately?

Only if testing confirms it is faulty; otherwise, check for clogs first.

When should I call a professional for the F09 error?

If the control board is suspected to be faulty or if you are uncomfortable performing the repairs.

User Comments (0)

Share your experience or solution below.

Be the first to comment!