Whirlpool Washing Machine Error F08

⚡ Quick Answer: F08 means Whirlpool Washing Machine error F08 indicates a drain pump failure, often accompanied by a humming noise and the machine... This is typically a DIY fix.

What Does Error F08 Mean?

Whirlpool Washing Machine error F08 indicates a drain pump failure, often accompanied by a humming noise and the machine not completing the cycle.

Common Causes

  • Drain Pump (60% likelihood)
  • Control Board (30% likelihood)
  • Wiring Issues (10% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Drain Pump for Blockages

    Remove the access panel and check the drain pump for any debris or obstructions that may be preventing it from functioning properly.

    Clear any visible blockages and ensure the pump impeller spins freely.

  2. Step 2: Test the Drain Pump with a Multimeter

    Disconnect the wires from the drain pump and use a multimeter to check for continuity. If there is no continuity, the pump needs replacement.

    A reading of 0 ohms indicates a good pump.

  3. Step 3: Examine Wiring Connections

    Inspect the wiring leading to the drain pump for any signs of damage or corrosion. Repair or replace any damaged wires.

    Ensure all connections are secure.

  4. Step 4: Check the Control Board

    If the drain pump tests good, the issue may lie with the control board. Inspect it for burnt components or loose connections.

    Consider replacing the control board if damage is found.

  5. Step 5: Reassemble and Test the Washer

    Once repairs are made, reassemble the washer and run a test cycle to ensure the error code does not reappear.

    Watch for any unusual sounds during operation.

How to Reset

To reset the F08 error, unplug the washing machine for 1 minute and then plug it back in. This may clear the error if the issue has been resolved.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number W10730972
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F08 error myself?

Yes, with basic tools and some mechanical knowledge, you can troubleshoot and repair the issue.

How long will it take to fix the F08 error?

Typically, it takes about 45-60 minutes to diagnose and repair the drain pump issue.

What causes the F08 error in my Whirlpool washer?

The F08 error is primarily caused by a malfunctioning drain pump or blockages preventing proper drainage.

Should I replace the drain pump if I see the F08 error?

If the pump fails the continuity test, it should be replaced to resolve the error.

When should I call a professional for the F08 error?

If you are uncomfortable testing electrical components or if the problem persists after replacing the pump.

User Comments (0)

Share your experience or solution below.

Be the first to comment!