Whirlpool Washing Machine Error F06

⚡ Quick Answer: The Whirlpool Washing Machine error F06 signifies a motor control failure due to a communication fault between the washer's control electronics and th... ⚠️ Difficulty Varies

What Does Error F06 Mean?

The Whirlpool Washing Machine error F06 signifies a motor control failure due to a communication fault between the washer's control electronics and the motor. This often results in the washer stopping mid-cycle, the drum failing to tumble or spin, and the display showing the error message. The issue may stem from loose or damaged wiring, a faulty motor control board (MCU), or a drive motor fault, interrupting normal operation.

Common Symptoms:

  • Washer stops mid‑cycle and displays F06
  • Drum does not tumble/spin when expected
  • Machine may start then abruptly halt
  • No valid motor speed feedback detected

Possible Causes

  • Loose or damaged motor wiring/connectors (medium)
  • Faulty motor control board (MCU) (medium)
  • Drive motor fault (medium)

How to Fix Error F06

DIY Fix Basic inspection and reset

  1. Unplug the washer from power for at least 5–10 minutes to reset electronics.
  2. Ensure the drum spins freely by hand (no obstructions).
  3. If comfortable, visually inspect rear access panel wiring for obvious damage (loose plugs, burns).

Technician Only Detailed motor and control diagnostics

  1. Disconnect power and remove access panels to access the motor, MCU, and harness.
  2. Reseat all motor and control board connectors and inspect pins for corrosion or damage.
  3. Test motor windings and MCU outputs with a multimeter per service manual specs.
  4. Replace the motor control board if defective; if the F06 persists, consider motor replacement.

Parts needed: Motor control board (MCU), Drive motor, Wiring harness

🛑 When to Call a Pro:
  • If F06 continues after basic reset and visual checks
  • If there are signs of burning, melting, or moisture damage inside electrical components
  • If you are not comfortable diagnosing electrical components

Technical Specifications

wattage 200W
component Motor Control Board
resistance 10-30 ohms
part_number W10620264
voltage_rating 120V AC

Common Questions

What does F06 error mean on Whirlpool Washing Machine?

F06 indicates a motor control failure where the control board isn't receiving a valid signal from the motor.

Can I fix Whirlpool Washing Machine F06 error myself?

Yes, you can reset the washer and inspect wiring for damage, but caution is advised.

How much does it cost to fix F06 error?

$150 to $450 for parts, depending on the model and required components.

When should I call a technician for F06?

Call a technician if the error persists after a reset, or if you notice signs of electrical damage.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!