Whirlpool Washing Machine Error DRN

Troubleshooting Steps

1. Step 1: Check the drain filter for debris

   Locate the drain filter, usually at the bottom front of the washer. Open the filter cover and remove any visible debris or lint. Have a bucket ready to catch any water that may spill out.

   Regular maintenance of the filter can prevent future issues.

2. Step 2: Inspect the drain pump for blockages

   Remove the access panel to the drain pump. Check for any foreign objects or clogs that may be obstructing the pump. Clear any blockages found.

   Ensure the washer is empty before performing this step.

3. Step 3: Test the drain pump motor

   Using a multimeter, check the resistance of the drain pump motor. If the reading is outside the expected range, the motor may need replacement.

   Refer to the technical specs for resistance values.

4. Step 4: Examine electrical connections

   Inspect the wiring harness connected to the drain pump for any signs of damage or loose connections. Repair or replace as necessary.

   Ensure all connections are secure to prevent future issues.

5. Step 5: Reassemble and test the washer

   After completing the repairs, reassemble any panels removed and run a short cycle to test if the error code has cleared and the pump operates correctly.

   Monitor for any unusual sounds during the test.