Whirlpool Oven Error F97

⚡ Quick Answer: The Whirlpool oven error code F97 indicates a malfunction related to the cooling fan. This may result in the oven displaying the F97 error shortly aft... ⚠️ Difficulty Varies

What Does Error F97 Mean?

The Whirlpool oven error code F97 indicates a malfunction related to the cooling fan. This may result in the oven displaying the F97 error shortly after starting and can lead to inconsistent cooking results. The primary causes are often linked to the cooling fan not operating at the required speed due to blockage, a failed motor, or insufficient voltage. Additionally, a communication fault within the control board may affect the fan's performance.

Common Symptoms:

  • Oven displays F97 and stops shortly after starting (community reports) (community)
  • Cooling fan not running or running too slowly (community technician report)

Possible Causes

  • Cooling fan not operating at required speed (blocked, failed motor, or insufficient voltage) (medium)
  • Control board or communication fault affecting cooling fan control (medium)

How to Fix Error F97

DIY Fix Basic checks and power reset

  1. Turn off power to the oven at the circuit breaker.
  2. Wait 10–15 minutes and restore power to allow control reset.
  3. Start the oven and observe if the F97 returns.

Technician Only Inspect and service cooling fan and related circuitry

  1. Remove oven access panels to locate the cooling fan assembly.
  2. Check for obstructions, debris, or physical blockage preventing fan rotation.
  3. Measure DC supply voltage to the fan motor (should match specified voltage, often +5 V DC per technician report).
  4. Test continuity and operation of the fan motor; replace if motor does not run at required speed.
  5. Inspect control board connectors and wiring to the fan; check for damaged wiring or poor connections.
  6. If fan assembly and wiring are validated, test or replace the oven’s control board.

Parts needed: Cooling fan/motor assembly, Fan wiring harness/connectors, Control board (if required)

🛑 When to Call a Pro:
  • If error persists after basic resets and the cooling fan does not operate correctly when tested.
  • If you are not comfortable working with electrical components inside the oven.

Next step

Choose the next step for F97

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Cooling Fan Motor

Moves cooling air around hot cooking components and electronic controls.

Typical part-only price
$35 - $120
DIY difficulty
Medium
Estimated time
30-75 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage
component Oven Temperature Sensor
resistance 1000-1100 ohms
part_number W10823748
voltage_rating 120V AC

Common Questions

What does F97 error mean on Whirlpool oven?

F97 indicates a cooling fan malfunction, resulting in erratic temperature readings and the oven stopping shortly after starting.

Can I fix Whirlpool oven F97 error myself?

Yes, you can try basic checks like power resetting the oven. If the error persists, further inspection may be needed.

How much does it cost to fix F97 error?

Repair costs vary, but cooling fan replacements are generally lower cost, while control board repairs may be higher.

When should I call a technician for F97?

Call a technician if the error persists after basic resets or if you're uncomfortable working with electrical components.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!