Whirlpool Oven Error F96

⚡ Quick Answer: F96 means whirlpool oven error F96 indicates a malfunction in the oven temperature sensor, often resulting in erratic temperature ... This is typically a DIY fix.

What Does Error F96 Mean?

whirlpool oven error F96 indicates a malfunction in the oven temperature sensor, often resulting in erratic temperature readings or failure to heat properly.

Common Causes

  • Oven Temperature Sensor (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Oven Temperature Sensor

    Remove the oven's back panel to access the temperature sensor. Visually check for any signs of damage or disconnection.

    Ensure the oven is completely cool before touching any components.

  2. Step 2: Test the Temperature Sensor

    Using a multimeter, measure the resistance of the temperature sensor. It should read between 1,000 to 1,200 ohms at room temperature. If the reading is outside this range, the sensor is faulty.

    Replace the sensor if it shows an incorrect resistance.

  3. Step 3: Check Wiring Connections

    Inspect the wiring connected to the temperature sensor for any signs of fraying or disconnection. Secure any loose wires and replace damaged ones.

    Good connections are crucial for accurate readings.

  4. Step 4: Reassemble the Oven

    Once repairs are made, reattach the back panel and ensure all screws are tightened. Restore power to the oven and test for functionality.

    Monitor the oven for any further error codes.

How to Reset

To reset the F96 error, turn off the oven at the circuit breaker for 5 minutes, then restore power and check for the error code.

Technical Specifications

wattage
component Oven Temperature Sensor
resistance 1,000 - 1,200 ohms
part_number W10823716
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, if you have basic tools and follow safety precautions, you can replace the sensor.

How much does it cost to replace the temperature sensor?

The cost of a new temperature sensor typically ranges from $30 to $100, depending on the model.

What causes the F96 error in my oven?

The F96 error is usually caused by a faulty oven temperature sensor that fails to provide accurate readings.

Should I call a professional if I see the F96 error?

If you're uncomfortable with electrical components or if the issue persists after replacement, it's best to consult a professional.

When should I expect my oven to function normally after fixing the F96 error?

After replacing the temperature sensor, your oven should function normally immediately, but monitor it for any recurring issues.

User Comments (0)

Share your experience or solution below.

Be the first to comment!