Whirlpool Oven Error F95

⚡ Quick Answer: F95 means whirlpool oven error F95 indicates a failure in the control board, often resulting in erratic display behavior or the ov... This is typically a DIY fix.

What Does Error F95 Mean?

whirlpool oven error F95 indicates a failure in the control board, often resulting in erratic display behavior or the oven not responding to commands.

Common Causes

  • Control Board (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Control Board

    Remove the oven's back panel to access the control board. Look for burnt components or visible damage.

    Check for any loose connections.

  2. Step 2: Test Voltage Supply

    Using a multimeter, check the voltage supply to the control board. It should match the specified voltage rating.

    If voltage is absent, trace back to the power source.

  3. Step 3: Replace the Control Board

    If the board is damaged, disconnect all wiring and replace it with a new control board. Ensure all connections are secure.

    Take a photo of the wiring before disconnecting for reference.

  4. Step 4: Reassemble and Test

    Reattach the back panel and power on the oven. Check if the error code persists and if the oven operates normally.

    If the error remains, further diagnostics may be needed.

How to Reset

To reset the F95 error, disconnect power to the oven for 5 minutes, then reconnect and check if the error persists.

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number W10812394
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F95 error myself?

Yes, if you have basic electrical knowledge and the right tools, you can attempt the repair.

How much does it cost to replace the control board?

The cost of a replacement control board can range from $100 to $300, depending on the model.

What causes the F95 error in Whirlpool ovens?

The F95 error is typically caused by a malfunctioning control board, often due to electrical surges or wear.

Should I call a technician for the F95 error?

If you're uncomfortable with electrical repairs or if the issue persists after replacing the control board, it's best to call a professional.

What happens if I ignore the F95 error?

Ignoring the F95 error can lead to further damage to the oven and may result in a complete failure of the appliance.

User Comments (0)

Share your experience or solution below.

Be the first to comment!