Whirlpool Oven Error F90

⚡ Quick Answer: F90 means whirlpool oven error F90 indicates a malfunction in the control board, often resulting in erratic display behavior or th... This is typically a DIY fix.

What Does Error F90 Mean?

whirlpool oven error F90 indicates a malfunction in the control board, often resulting in erratic display behavior or the oven not responding to commands.

Common Causes

  • Control Board (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Control Board

    Remove the oven's back panel to access the control board. Look for any visible signs of damage, such as burnt components or loose connections.

    Take a photo of the wiring for reference during reassembly.

  2. Step 2: Test the Control Board

    Using a multimeter, check for continuity across the control board connections. If there is no continuity, the board likely needs replacement.

    Ensure the multimeter is set to the correct mode for testing.

  3. Step 3: Replace the Control Board

    If the control board is faulty, disconnect the wiring harness and remove the screws securing the board. Install the new control board and reconnect the wiring harness.

    Double-check all connections before reassembling the oven.

  4. Step 4: Reassemble and Test

    Replace the back panel and secure it. Restore power to the oven and test to see if the error code persists.

    If the error code returns, further diagnosis may be needed.

How to Reset

To reset the F90 error, disconnect the oven from power for 10 minutes and then reconnect it. This may clear temporary faults, but the underlying issue must be fixed.

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number W10812394
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the whirlpool oven error F90 myself?

Yes, if you have basic electrical skills and tools, you can diagnose and replace the control board.

How much does it cost to replace the control board?

The cost of a replacement control board can range from $100 to $300, depending on the model.

What causes the F90 error in whirlpool ovens?

The F90 error is typically caused by a malfunctioning control board, often due to power surges or component failures.

Should I call a professional for the F90 error?

If you're uncomfortable with electrical repairs or if the problem persists after replacing the control board, it's best to consult a professional.

When should I consider replacing the oven instead of repairing?

If the cost of repairs exceeds half the price of a new oven or if multiple components are failing, replacement may be more economical.

User Comments (0)

Share your experience or solution below.

Be the first to comment!