Whirlpool Oven Error F8
⚡ Quick Answer: The Whirlpool Oven F8 error code indicates a potential malfunction in the oven's temperature sensor or related electronic components. This error can m... ⚠️ Difficulty Varies
What Does Error F8 Mean?
The Whirlpool Oven F8 error code indicates a potential malfunction in the oven's temperature sensor or related electronic components. This error can manifest as erratic temperature readings, the oven failing to start, or shutting off unexpectedly. It may also occur during heating or at startup. Common causes include a malfunctioning cooling fan, control board issues, or improper accessory insertion, such as a meat probe. Addressing airflow and cooling issues can help resolve this fault.
Common Symptoms:
- Error code F8 appears on display when oven won’t start or shuts off
- In some models appears with additional suffix (e.g., F8-E1 or F8-E0)
- May occur during heating or at startup
Possible Causes
- Airflow / cooling fan malfunction (community repair sources) (medium)
- Control board or control communication error (community interpretation) (medium)
- Incorrect accessory insertion (official Whirlpool range doc) (high)
How to Fix Error F8
DIY Fix Basic user checks and reset
- Ensure meat probe (if applicable) is properly inserted.
- Turn off power by switching off the circuit breaker for at least one minute and then restore power to clear transient errors.
- Ensure vents and airflow aren’t blocked and oven is not overheated before retrying operation.
Technician Only Diagnose cooling fan and control board
- Disconnect appliance from power.
- Inspect cooling fan for free movement and test with multimeter for continuity.
- Check wiring harness from control board to fan and sensors.
- If fan fails tests, replace cooling fan motor.
- If fan tests good but error persists, test/replace control board.
- Verify proper communication between control board and display.
Parts needed: Oven cooling fan motor, Control board, Wiring harness/connectors
- If error persists after basic resets and visual inspections.
- If internal fan or control board tests show faults.
- If uncertainty about safe testing of live electrical components.
Technical Specifications
| wattage | |
|---|---|
| component | Oven Temperature Sensor |
| resistance | 1,000-1,200 ohms |
| part_number | W10823680 |
| voltage_rating | 120V AC |
Common Questions
What does F8 error mean on Whirlpool Oven?
The F8 error indicates a malfunction in the oven's temperature sensor or related electronics, causing erratic readings or oven shutdown.
Can I fix Whirlpool Oven F8 error myself?
Yes, you can perform basic checks like ensuring proper accessory insertion and resetting the oven by turning off the power.
How much does it cost to fix F8 error?
The estimated repair cost for the F8 error ranges from $100 to $500 depending on the parts and service needed.
When should I call a technician for F8?
Call a technician if the error persists after basic resets or if there are faults in the internal fan or control board.
Sources & References
- Whirlpool F8 - Range Error Code (official)
- Whirlpool F8 E1 - Wall Oven Support (official)
Data last verified: 2026-01-10
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!