Whirlpool Oven Error F30

⚡ Quick Answer: The Whirlpool oven error F30 indicates a malfunction in the temperature sensor, resulting in inaccurate temperature readings or failure to heat. This ... ⚠️ Difficulty Varies

What Does Error F30 Mean?

The Whirlpool oven error F30 indicates a malfunction in the temperature sensor, resulting in inaccurate temperature readings or failure to heat. This error often arises due to an open or damaged connection between the temperature sensor and the control board. Symptoms include the oven display showing F30, baking or broiling functions being disabled, and the oven's inability to heat properly. The error may persist even after power cycling the unit.

Common Symptoms:

  • Oven display shows F30 and baking or broiling functions are disabled
  • Oven fails to heat or regulate temperature properly
  • Error persists across power cycles
  • No other F-series error codes indicating unrelated problems

Possible Causes

  • Temperature sensor (probe) circuit open or faulty connection (medium)
  • Faulty temperature sensor (probe) element (medium)
  • Damaged wiring or harness between sensor and control board (medium)
  • Electronic oven control board misinterpreting sensor signal (low)

How to Fix Error F30

DIY Fix Basic Check and Restart

  1. Turn off and disconnect power to the oven (unplug or shut off circuit breaker).
  2. Wait 60 seconds and restore power, then attempt to clear the error by pressing Cancel/Clear.
  3. Observe whether F30 reappears immediately.

Technician Only Inspect/Repair Temperature Sensor Circuit

  1. Disconnect power to the oven.
  2. Access the oven cavity rear panel to locate the temperature sensor (thin metal probe).
  3. Inspect the sensor and associated wiring harness for visible damage, loose connections, or disconnection.
  4. Using a multimeter at room temperature, measure the sensor resistance.
  5. Replace the temperature sensor if it reads outside expected range or is physically damaged.
  6. Repair or replace any damaged wiring harnesses.
  7. Reassemble and restore power; verify F30 is cleared.

Parts needed: Oven temperature sensor (probe), Wiring harness/connectors, Control board (if diagnosing false detection)

🛑 When to Call a Pro:
  • If the error persists after verifying sensor and wiring integrity
  • If there is any uncertainty working with internal electrical components
  • If testing indicates correct sensor and wiring but the error remains (possible control board fault)

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-1100 ohms
part_number W10823616
voltage_rating 120V AC

Common Questions

What does F30 error mean on whirlpool oven?

F30 indicates a temperature sensor malfunction, leading to inaccurate readings and heating issues.

Can I fix whirlpool oven F30 error myself?

Yes, you can attempt a basic check by restarting the oven and inspecting the sensor and wiring.

How much does it cost to fix F30 error?

Repair costs can vary: sensor replacement is low cost, while harness or control board repairs can be medium to high.

When should I call a technician for F30?

Call a technician if the error persists after checking the sensor and wiring, or if you're unsure about handling electrical components.

Data last verified: 2026-01-11

User Comments (0)

Share your experience or solution below.

Be the first to comment!