Whirlpool Oven Error F2E0

⚡ Quick Answer: F2E0 means Whirlpool Oven error F2E0 indicates a malfunction in the oven temperature sensor, often resulting in erratic temperature... This is typically a DIY fix.

What Does Error F2E0 Mean?

Whirlpool Oven error F2E0 indicates a malfunction in the oven temperature sensor, often resulting in erratic temperature readings and inconsistent cooking results.

Common Causes

  • Oven Temperature Sensor (70% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Oven Temperature Sensor

    Locate the temperature sensor inside the oven. Remove the screws securing it in place and gently pull it out to inspect for any visible damage or corrosion.

    Check for any loose connections or burnt wires.

  2. Step 2: Test the Sensor's Resistance

    Using a multimeter, set it to the ohms setting and measure the resistance of the temperature sensor. It should typically read between 1000-1100 ohms at room temperature.

    If the reading is outside this range, the sensor is likely faulty.

  3. Step 3: Replace the Temperature Sensor if Necessary

    If the sensor is defective, order a replacement part. Install the new sensor by reversing the removal steps, ensuring all connections are secure.

    Double-check that the sensor is properly seated before securing it.

  4. Step 4: Reset the Oven Control Board

    After replacing the sensor, reset the oven control board by holding the 'Start' and 'Cancel' buttons simultaneously for 3 seconds.

    This will clear any lingering error codes.

How to Reset

To reset the oven after fixing the F2E0 error, hold the 'Start' and 'Cancel' buttons together for 3 seconds.

Technical Specifications

wattage
component Oven Temperature Sensor
resistance 1000-1100 ohms
part_number W10589843
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, replacing the temperature sensor is a straightforward process that most homeowners can handle with basic tools.

How much does a new oven temperature sensor cost?

A replacement oven temperature sensor typically costs between $20 to $50, depending on the model.

What causes the F2E0 error to appear?

The F2E0 error is usually caused by a malfunctioning temperature sensor, which can fail due to age or overheating.

Should I call a professional if I see the F2E0 error?

If you're uncomfortable with DIY repairs or if the error persists after replacing the sensor, it's advisable to consult a professional technician.

When should I consider replacing my oven?

If you frequently encounter error codes like F2E0 and other components fail regularly, it may be time to consider a new oven.

User Comments (0)

Share your experience or solution below.

Be the first to comment!