Whirlpool Oven Error F26

⚡ Quick Answer: The Whirlpool oven error code F26 indicates a potential issue with the temperature sensor, which may result in inaccurate temperature readings or the ... ✅ DIY Fixable

What Does Error F26 Mean?

The Whirlpool oven error code F26 indicates a potential issue with the temperature sensor, which may result in inaccurate temperature readings or the oven failing to heat properly. To address this, verify that the error is specific to the oven model and not another appliance. If the error persists, performing a power reset by turning off the oven at the circuit breaker for at least 60 seconds may help clear the issue.

Possible Causes

  • Temperature Sensor

How to Fix Error F26

DIY Fix Verify the appliance type and model number

  1. Ensure the error code is being shown on an oven and not another nearby Whirlpool appliance (e.g., washer/dryer).
  2. Check the oven’s model number label (inside door frame or behind drawer) and look up its specific error code list in the official manual.

DIY Fix Power reset the oven

  1. Turn off the oven at the circuit breaker or unplug it.
  2. Wait at least 60 seconds.
  3. Restore power and see if the error clears.

Technician Only Consult official Whirlpool technical support for F26

  1. Contact Whirlpool support with the exact model number and error display.
  2. Request official error code interpretation or service bulletin for F26 if available.
  3. Technician to run diagnostic mode specific to that oven model.
🛑 When to Call a Pro:
  • If the error persists after power reset and careful verification of appliance type/model.
  • If unexpected behavior (smoke, unusual noises) accompanies the error display.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-1100 ohms
part_number W10830203
voltage_rating 120V AC

Common Questions

What does F26 error mean on Whirlpool oven?

F26 indicates a potential malfunction in the temperature sensor, leading to erratic temperature readings.

Can I fix Whirlpool oven F26 error myself?

Yes, verify the model and perform a power reset to see if the error clears.

How much does it cost to fix F26 error?

Repair costs vary by model and region; consult a technician for an estimate.

When should I call a technician for F26?

Call a technician if the error persists after a reset or if you notice unusual behavior like smoke or noises.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!