Whirlpool Oven Error F23

⚡ Quick Answer: The Whirlpool oven error code F23 indicates a malfunction in the temperature sensor, leading to erratic temperature readings or a complete failure to ... ✅ DIY Fixable

What Does Error F23 Mean?

The Whirlpool oven error code F23 indicates a malfunction in the temperature sensor, leading to erratic temperature readings or a complete failure to heat. This error typically appears on the oven control display, preventing normal operation and causing the oven to stop working during use. It can occur at startup or during the heating process, disrupting your cooking tasks.

Common Symptoms:

  • Error F23 appears on oven control display and prevents normal operation
  • Oven stops operation and displays code instead of cooking temperature or program
  • May occur at start or during heating

Possible Causes

  • Temperature Sensor
  • Wiring Issues

How to Fix Error F23

DIY Fix Restart and check basic connections

  1. Turn off the oven power either by unplugging or switching off at the circuit breaker.
  2. Wait 1–2 minutes and restore power.
  3. Observe if the error returns.
  4. Ensure oven control panel buttons are not stuck or unresponsive.

Technician Only Inspect internal wiring and control interfaces

  1. Disconnect power to the oven.
  2. Access the control panel and inspect connector harness between keypad/touchpad and main control board.
  3. Look for loose, damaged, or frayed wires and repair or replace as needed.
  4. If F23 persists, consider inspecting the main control board and keypad assembly for faults.

Parts needed: Control board, Keypad/touchpad harness, Wiring harness

🛑 When to Call a Pro:
  • If error persists after power cycling and basic checks
  • If internal diagnostics or wiring inspections reveal damaged boards or connectors
  • If you are not comfortable working near live electrical parts

Technical Specifications

wattage
component Temperature Sensor
resistance 1000-1100 ohms
part_number W10830243
voltage_rating 120V AC

Common Questions

What does F23 error mean on whirlpool oven?

F23 error indicates a malfunction in the temperature sensor, causing the oven to stop operation and display the error instead of a cooking temperature.

Can I fix whirlpool oven F23 error myself?

Yes, you can try restarting the oven and checking basic connections by turning off the power and observing if the error returns.

How much does it cost to fix F23 error?

Repair costs vary depending on parts and service labor; control board replacement can be particularly costly.

When should I call a technician for F23?

Call a technician if the error persists after power cycling and basic checks, or if you find damaged internal components.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!