Whirlpool Oven Error F1E0

⚡ Quick Answer: F1E0 means Whirlpool Oven error F1E0 indicates a malfunction in the control board, often accompanied by erratic display behavior or... This is typically a DIY fix.

What Does Error F1E0 Mean?

Whirlpool Oven error F1E0 indicates a malfunction in the control board, often accompanied by erratic display behavior or failure to respond to input.

Common Causes

  • Control Board (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Control Board

    Remove the oven's back panel to access the control board. Look for burnt components or loose connections.

    Document any visible damage with photos.

  2. Step 2: Test the Control Board

    Using a multimeter, check for continuity across the control board terminals. If readings are inconsistent, the board may need replacement.

    Ensure the multimeter is set to the correct setting for testing.

  3. Step 3: Replace the Control Board

    If the control board is faulty, disconnect all wires and remove the screws securing it. Install the new control board and reconnect the wires as per the schematic.

    Double-check wire connections before reassembling.

  4. Step 4: Reassemble the Oven

    Replace the back panel and secure it with screws. Ensure all panels are properly aligned.

    Keep screws organized to avoid confusion during reassembly.

  5. Step 5: Test the Oven

    Plug in the oven and run a test cycle to ensure the error code does not reappear and all functions operate correctly.

    Monitor for any unusual sounds or smells during the test.

How to Reset

To reset the F1E0 error, unplug the oven for 10 minutes and then plug it back in. If the error persists, further diagnosis is required.

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number W10812394
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the F1E0 error myself?

Yes, if you have basic electrical knowledge and the right tools, you can replace the control board.

How much does it cost to replace the control board?

Replacement control boards typically range from $100 to $300, depending on the model.

What causes the F1E0 error in Whirlpool ovens?

The F1E0 error is usually caused by a malfunctioning control board, often due to electrical surges or component failure.

Should I call a professional for the F1E0 error?

If you are uncomfortable with electrical repairs or lack the necessary tools, it's best to consult a professional technician.

When should I consider replacing the control board?

If multiple tests confirm the control board is faulty and the error persists after troubleshooting, replacement is recommended.

User Comments (0)

Share your experience or solution below.

Be the first to comment!