Whirlpool Oven Error F15

⚡ Quick Answer: F15 means Whirlpool oven error F15 indicates a malfunction in the temperature sensor, often resulting in erratic temperature readi... This is typically a DIY fix.

What Does Error F15 Mean?

Whirlpool oven error F15 indicates a malfunction in the temperature sensor, often resulting in erratic temperature readings or failure to heat.

Common Causes

  • Temperature Sensor (70% likelihood)

Troubleshooting Steps

  1. Step 1: Access the Temperature Sensor

    Remove the oven's back panel to locate the temperature sensor. It is typically situated near the top of the oven cavity.

    Ensure you have the correct screwdriver for the panel screws.

  2. Step 2: Test the Temperature Sensor

    Using a multimeter, check the resistance of the temperature sensor. It should read between 1,000 and 1,200 ohms at room temperature.

    If the reading is outside this range, the sensor is likely faulty.

  3. Step 3: Replace the Temperature Sensor

    If the sensor is faulty, disconnect the wiring harness and remove the sensor from its mounting. Install the new sensor and reconnect the wiring.

    Ensure the new sensor is compatible with your oven model.

  4. Step 4: Reassemble the Oven

    Replace the back panel and secure it with screws. Ensure all connections are tight before powering on the oven.

    Double-check that no tools are left inside the oven.

  5. Step 5: Test the Oven

    Turn on the oven and monitor the temperature to ensure it heats correctly without displaying the F15 error again.

    Use an oven thermometer for accurate temperature readings.

How to Reset

To reset the F15 error, turn off the oven at the circuit breaker for 5 minutes, then restore power. If the error persists, further inspection is needed.

Technical Specifications

wattage
component Temperature Sensor
resistance 1,000 - 1,200 ohms
part_number W10823624
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, replacing the temperature sensor is a straightforward process that most homeowners can handle with basic tools.

How much does a new temperature sensor cost?

A new temperature sensor typically costs between $20 and $50, depending on the model.

What causes the F15 error in my Whirlpool oven?

The F15 error is usually caused by a malfunctioning temperature sensor that fails to provide accurate readings.

Should I call a technician if I see the F15 error?

If you're uncomfortable performing the repair yourself or if the issue persists after replacing the sensor, it's best to call a technician.

When should I consider replacing my oven?

If the F15 error occurs frequently and repairs are becoming costly, it may be time to consider replacing the oven.

User Comments (0)

Share your experience or solution below.

Be the first to comment!