Whirlpool Oven Error F14

⚡ Quick Answer: F14 means whirlpool oven error F14 indicates a malfunction in the temperature sensor, often resulting in erratic temperature readi... This is typically a DIY fix.

What Does Error F14 Mean?

whirlpool oven error F14 indicates a malfunction in the temperature sensor, often resulting in erratic temperature readings and inconsistent cooking results.

Common Causes

  • Temperature Sensor (60% likelihood)

Troubleshooting Steps

  1. Step 1: Check the Temperature Sensor Connection

    Remove the oven's back panel to access the temperature sensor. Inspect the wiring for any loose connections or damage.

    Ensure the oven is completely cool before starting.

  2. Step 2: Test the Temperature Sensor

    Using a multimeter, set it to the ohms setting. Disconnect the sensor and measure the resistance. It should be around 1,000 ohms at room temperature.

    If the reading is significantly off, the sensor may need replacement.

  3. Step 3: Replace the Temperature Sensor

    If the sensor is faulty, disconnect it and remove it from the oven. Install the new sensor by reversing the removal process and reconnecting the wiring.

    Make sure all connections are secure.

  4. Step 4: Reassemble the Oven

    Replace the back panel and ensure all screws are tightened. Plug the oven back in and test for proper operation.

    Monitor the oven for any further error codes.

How to Reset

The F14 error cannot be reset until the underlying issue with the temperature sensor is resolved.

Technical Specifications

wattage
component Temperature Sensor
resistance 1,000 ohms at room temperature
part_number W10823751
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, if you have basic tools and follow the steps carefully, you can replace the sensor.

How much does a temperature sensor cost?

A replacement temperature sensor typically costs between $20 to $50, depending on the model.

What causes the F14 error in my oven?

The F14 error is usually caused by a faulty temperature sensor or a wiring issue affecting its performance.

Should I call a professional for the F14 error?

If you're uncomfortable with electrical components or the issue persists after replacement, it's best to consult a professional.

When should I expect the F14 error to clear?

The error should clear after the faulty sensor is replaced and the oven is restarted.

User Comments (0)

Share your experience or solution below.

Be the first to comment!