Whirlpool Oven Error F13
⚡ Quick Answer: The Whirlpool oven error code F13 indicates a malfunction related to the temperature sensor or control communication issues. This error can lead to er... ✅ DIY Fixable
What Does Error F13 Mean?
The Whirlpool oven error code F13 indicates a malfunction related to the temperature sensor or control communication issues. This error can lead to erratic temperature readings and inconsistent cooking results. When the F13 code appears, the oven may stop heating or functioning normally, often displaying the error upon startup or during use. To address this, power-cycling the oven may help clear the error and restore normal operation.
Common Symptoms:
- F13 code displayed on oven control panel
- Oven may stop heating or functioning normally when code is displayed
- Code may appear upon startup or during use
Possible Causes
- Internal control communication fault (EEPROM or microprocessor) (low)
- Loose or faulty wiring to control or sensor (low)
How to Fix Error F13
DIY Fix Power cycle the oven
- Turn off the oven at the circuit breaker or disconnect power.
- Wait at least 60 seconds.
- Restore power and start a cycle.
- Monitor for the F13 code reappearing.
Technician Only Inspect control board wiring and EEPROM/microprocessor interface
- Disconnect power to the oven.
- Remove access panels to reach the control board.
- Inspect wiring harnesses for looseness, damage, or corrosion.
- Test communication lines between control board and memory/EEPROM if diagnostic tools are available.
- Replace or repair any damaged wiring or control components as necessary.
Parts needed: Control board, Wiring harness, EEPROM/memory module (if serviceable)
- If the F13 error persists after power cycling.
- If you are not comfortable working with oven electrical components.
- If visible wiring damage or control board faults are suspected.
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | W10823725 |
| voltage_rating | 120V AC |
Common Questions
What does F13 error mean on whirlpool oven?
F13 indicates a malfunction possibly related to the temperature sensor or control communication, causing erratic cooking results.
Can I fix whirlpool oven F13 error myself?
Yes, you can attempt to power cycle the oven by turning it off at the circuit breaker for at least 60 seconds.
How much does it cost to fix F13 error?
Repair costs typically range from $150 to $600 or more, depending on parts and labor.
When should I call a technician for F13?
Call a technician if the F13 error persists after power cycling, or if you're uncomfortable handling electrical components.
Sources & References
- F13 - Wall Oven - Product Help | Whirlpool (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!