Westinghouse Refrigerator Error ER
⚡ Quick Answer: The ER error code on your Westinghouse refrigerator indicates a malfunction with the temperature sensor, which can lead to temperature fluctuations an... ⚠️ Difficulty Varies
What Does Error ER Mean?
The ER error code on your Westinghouse refrigerator indicates a malfunction with the temperature sensor, which can lead to temperature fluctuations and inconsistent cooling. This issue may stem from a faulty freezer temperature sensor or a problem within the defrost system. It's essential to address this promptly to maintain optimal cooling performance.
Common Symptoms:
- Error code "ER" displayed on control panel
- Possible cooling irregularities (e.g., freezer not reaching proper temperature)
Possible Causes
- Freezer sensor or defrost system fault (community technician report) (low)
How to Fix Error ER
DIY Fix Basic reset and inspection
- Unplug the refrigerator from power for ~5–10 minutes to allow any control board resets.
- Plug the refrigerator back in and observe if the ER code returns.
- Ensure vents inside the fridge/freezer are not blocked by food items so airflow is maintained.
Technician Only Inspect sensors and defrost components
- Disconnect power to the refrigerator.
- Access the freezer and evaporator area to locate the freezer temperature sensor/thermistor and defrost components.
- Test the freezer temperature sensor and defrost thermostat/heater for continuity with a multimeter.
- Inspect wiring harnesses for loose connections or damage between sensors, control board, and defrost components.
- Replace any failed sensors or defrost parts as indicated by testing.
Parts needed: Freezer temperature sensor/thermistor, Defrost thermostat, Defrost heater, Wiring harness/connectors
- If error persists after basic reset and safe inspection
- If the user is not comfortable accessing interior components or performing electrical diagnostics
Next step
Choose the next step for ER
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Defrost Thermostat
Monitors evaporator temperature and opens the defrost-heater circuit at a safe temperature.
Defrost Heater
Melts frost buildup on the evaporator coils during the defrost cycle.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 5-10 kOhms |
| part_number | W10316864 |
| voltage_rating | 120V AC |
Common Questions
What does ER error mean on westinghouse refrigerator?
ER error indicates a malfunction in the temperature sensor, leading to cooling issues.
Can I fix westinghouse refrigerator ER error myself?
Yes, you can perform a basic reset by unplugging the fridge for 5-10 minutes.
How much does it cost to fix ER error?
Estimated repair costs range from $50 to $200+, depending on parts and labor.
When should I call a technician for ER?
Call a technician if the error persists after a reset or if you are uncomfortable with DIY repairs.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!