Westinghouse Refrigerator Error E9

⚡ Quick Answer: The E9 error code on Westinghouse refrigerators typically indicates a malfunction in the ice maker subsystem, specifically related to the bin-full or ... ✅ DIY Fixable

What Does Error E9 Mean?

The E9 error code on Westinghouse refrigerators typically indicates a malfunction in the ice maker subsystem, specifically related to the bin-full or infrared level sensor. This issue can lead to inconsistent operation of the ice maker, with symptoms such as the ice maker refusing to start a new cycle despite the bin being empty. To address this issue, inspect the sensor area for blockages and perform a basic reset of the ice maker module.

Common Symptoms:

  • Ice maker may refuse to start a new cycle while showing E9
  • Ice bin may be empty but refrigerator indicates an E9 error

Possible Causes

  • Faulty or blocked ice maker bin full/infrared level sensor (medium)

How to Fix Error E9

DIY Fix Check ice maker area and basic reset

  1. Locate the ice maker module inside the freezer section if present
  2. Inspect the bin full/infrared sensor area for visible blockages or buildup
  3. Gently clean the sensor and surrounding area
  4. Unplug the refrigerator for 5 minutes, then plug it back in to reset
  5. Observe if the E9 error clears and ice maker resumes normal operation

Technician Only Inspect and service ice maker sensor assembly

  1. Verify model has an ice maker and confirm E9 is tied to that subsystem
  2. Test sensor operation with appropriate diagnostic tools
  3. Check the infrared emitter/receiver pair for proper function
  4. Inspect and realign or replace sensor bracket if misaligned
  5. Repair or replace damaged wiring to the sensor
  6. Verify ice maker operation post‑repair

Parts needed: Infrared level sensor / bin full sensor, Sensor wiring harness, Ice maker assembly parts as required

🛑 When to Call a Pro:
  • If error persists after cleaning and basic reset
  • If you cannot safely access or diagnose the ice maker sensor area
  • If other error codes or symptoms (e.g., fridge not cooling) also appear

Next step

Choose the next step for E9

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

Typical part-only price
$20 - $120
DIY difficulty
Medium
Estimated time
30-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Ice Maker Assembly

Automatically freezes and dispenses ice cubes inside the freezer compartment.

$75 - $160 · Medium · 20-30 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 kOhms
part_number W10316821
voltage_rating 120V AC

Common Questions

What does E9 error mean on Westinghouse Refrigerator?

E9 indicates a fault in the ice maker subsystem, often linked to the bin-full or infrared level sensor.

Can I fix Westinghouse Refrigerator E9 error myself?

Yes, you can check the ice maker area for blockages and perform a basic reset.

How much does it cost to fix E9 error?

Repair costs range from $50 to $200, depending on parts and labor in your region.

When should I call a technician for E9?

Call a technician if the error persists after cleaning, if you cannot access the sensor safely, or if additional error codes appear.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!