Westinghouse Refrigerator Error E17

⚡ Quick Answer: The Westinghouse Refrigerator error code E17 indicates a fault in the fast-freeze circuit, leading to issues with the temperature sensor and erratic c... ✅ DIY Fixable

What Does Error E17 Mean?

The Westinghouse Refrigerator error code E17 indicates a fault in the fast-freeze circuit, leading to issues with the temperature sensor and erratic cooling behavior. This may prevent the freezer from entering or exiting fast-freeze mode, causing inconsistent temperature readings. To troubleshoot this issue, you can power cycle the refrigerator to reset the control logic and check the fast-freeze selection. If the error persists, further inspection of the fast-freeze circuit, user interface components, and control board may be required.

Common Symptoms:

  • Freezer may not enter or exit fast‑freeze / quick‑freeze mode
  • Error code displayed on panel indicating fast‑freeze control problem

Possible Causes

  • Fast‑freeze circuit control fault (medium)
  • Faulty fast‑freeze button or user interface switch (medium)
  • Wiring or control board relay fault (medium)

How to Fix Error E17

DIY Fix Power cycle and check fast‑freeze selection

  1. Disconnect refrigerator power at wall outlet for about 1–2 minutes.
  2. Reconnect and power on unit to reset control logic.
  3. Observe if the E17 error clears and attempt to activate fast‑freeze mode again.

Technician Only Inspect and repair fast‑freeze circuit and UI components

  1. Unplug unit and remove control panel to access fast‑freeze button/switch assembly.
  2. Test the fast‑freeze button or switch for proper mechanical function and continuity.
  3. Inspect wiring harness from UI to main control board for damage or loose connections.
  4. Inspect the main control board relay associated with fast‑freeze function for burn marks or stickiness.
  5. Replace defective UI board, switch, or main control board components as necessary.

Parts needed: Fast‑freeze button or switch, User interface board, Main control board/relay

🛑 When to Call a Pro:
  • If the error persists after basic reset and UI checks
  • If you are uncomfortable accessing internal electronics
  • If control board shows signs of significant damage or multiple error conditions

Next step

Choose the next step for E17

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

User Interface Board

Receives button or touch input and controls the appliance display and indicators.

Typical part-only price
$70 - $220
DIY difficulty
Medium
Estimated time
20-60 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 kΩ
part_number W10316890
voltage_rating 120V AC

Common Questions

What does E17 error mean on Westinghouse Refrigerator?

E17 indicates a fast-freeze circuit fault, affecting temperature readings and cooling.

Can I fix Westinghouse Refrigerator E17 error myself?

Yes, you can try power cycling the fridge and checking the fast-freeze selection.

How much does it cost to fix E17 error?

Estimated repair costs for E17 range from $100 to $350, including parts and labor.

When should I call a technician for E17?

Call a technician if the error persists after resetting or if you are uncomfortable with internal repairs.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!