Westinghouse Refrigerator Error E14
⚡ Quick Answer: The Westinghouse Refrigerator E14 error code indicates a malfunction in the temperature sensor, leading to erratic temperature readings and inconsiste... ✅ DIY Fixable
What Does Error E14 Mean?
The Westinghouse Refrigerator E14 error code indicates a malfunction in the temperature sensor, leading to erratic temperature readings and inconsistent cooling performance. This issue may prevent the fridge from reaching or maintaining the desired temperature, prompting the control/display to show the error code. Regular maintenance, such as ensuring door seals are intact and cleaning condenser coils, can help mitigate these issues.
Common Symptoms:
- May be associated with inability to reach or maintain set temperature (based on related freezer code pattern)
- Control/display may show code when temperature control issues occur
Possible Causes
- Temperature Sensor
How to Fix Error E14
DIY Fix Check basic refrigerator conditions
- Ensure the refrigerator door(s) are fully closed and sealing properly.
- Verify temperature setpoints are correctly set for both fridge and freezer compartments.
- Check that condenser coils at the back/bottom of the refrigerator are clean and free of dust.
- Confirm the interior temperature is not excessively warm despite normal operation.
Technician Only Diagnostic check of temperature control circuit
- Connect a service diagnostic tool or multimeter to verify the temperature sensor/thermistor resistances against specification.
- Inspect the control board and associated wiring for signs of damage or poor connections.
- Test the thermostat/temperature control board for proper operation.
- Replace any faulty sensors or control components identified.
Parts needed: Temperature sensor/thermistor, Control board, Wiring harness
- If after basic user checks the refrigerator continues displaying E14 and fails to cool properly
- If internal diagnostics or multimeter tests indicate sensor or control board faults
Next step
Choose the next step for E14
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10k ohms at 25°C |
| part_number | W10822566 |
| voltage_rating | 120V AC |
Common Questions
What does E14 error mean on Westinghouse Refrigerator?
E14 indicates a temperature sensor malfunction, causing temperature control issues.
Can I fix Westinghouse Refrigerator E14 error myself?
Yes, check door seals and condenser coils, and verify temperature settings.
How much does it cost to fix E14 error?
Estimated repair costs range from $100 to $400, depending on the model and region.
When should I call a technician for E14?
Call a technician if the error persists after user checks or if diagnostics indicate sensor or control board faults.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!