Westinghouse Refrigerator Error E13
⚡ Quick Answer: The E13 error code on your Westinghouse refrigerator indicates a malfunction related to low voltage or power supply issues, which can cause inconsiste... ✅ DIY Fixable
What Does Error E13 Mean?
The E13 error code on your Westinghouse refrigerator indicates a malfunction related to low voltage or power supply issues, which can cause inconsistent cooling and prevent the compressor from running. This fault may arise from unstable incoming voltage, a faulty power cord, or a failed control board. Addressing the E13 error promptly is crucial to restore proper functionality.
Common Symptoms:
- Refrigerator/freezer may not cool and compressor may not run
- Unit displays E13 on control panel or error indicator
- Possible shutdown or failure to start cooling cycle
Possible Causes
- Low or unstable incoming supply voltage (medium)
- Faulty power cord/plug or loose terminal connections (medium)
- Control board power supply section failure (low)
How to Fix Error E13
DIY Fix Verify Power Source and Connections
- Ensure the refrigerator is plugged into a properly rated outlet
- Check that the circuit breaker/fuse for that outlet hasn’t tripped
- Test outlet voltage with a known good device or multimeter to confirm stable supply within expected range
- Inspect the refrigerator’s power cord for visible damage
- Ensure the plug is fully seated in the outlet and any accessible terminal block connections are secure
Technician Only Inspect and Repair Electrical Supply and Control Board
- Power off and unplug refrigerator
- Open access panel to inspect power cord entry and terminal block for burn marks, looseness or corrosion
- Use a multimeter to verify continuity and proper voltage at key power points
- Evaluate the control board power supply section for failed components or visible damage
- Replace defective power supply section or control board as needed
Parts needed: Multimeter, Replacement power cord (if damaged), Control board or power supply module
- If error persists after verifying power source and basic connections
- If control board inspection shows burnt/damaged components
- If user is not comfortable working around electrical components
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Power Cord
Supplies mains power to the appliance and includes the model-specific plug and terminal connection.
- Typical part-only price
- $15 - $70
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Power Control Board
Distributes and switches electrical power for the appliance's major loads.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 5-10 kOhms |
| part_number | WB20X10019 |
| voltage_rating | 120V AC |
Common Questions
What does E13 error mean on Westinghouse Refrigerator?
E13 indicates low voltage or power supply faults, leading to cooling issues and compressor failure.
Can I fix Westinghouse Refrigerator E13 error myself?
Yes, you can check the power source, ensure connections are secure, and test the outlet voltage.
How much does it cost to fix E13 error?
Repair costs for the E13 error range from $100 to $400, depending on parts and labor.
When should I call a technician for E13?
Call a technician if the error persists after your checks or if the control board shows damage.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!