Westinghouse Refrigerator Error E0
⚡ Quick Answer: The E0 error on your Westinghouse refrigerator indicates a communication fault, typically linked to the ice maker or related sensors. This may result ... ✅ DIY Fixable
What Does Error E0 Mean?
The E0 error on your Westinghouse refrigerator indicates a communication fault, typically linked to the ice maker or related sensors. This may result in erratic temperature readings and can cause the compressor to run continuously. Check for loose connections or damaged wiring in the ice maker area to resolve the issue.
Common Symptoms:
- E0 displayed on fridge panel
- Ice maker not functioning normally when code appears (reported in similar cases)
Possible Causes
- Communication fault between refrigerator control board and ice maker module/sensor (medium)
How to Fix Error E0
DIY Fix Basic user checks for E0 error
- If your model has an ice/water dispenser or ice maker, make sure the fridge is powered off and unplugged from the outlet.
- Visually inspect the ice maker area for loose wiring harnesses or visibly damaged connectors.
- Plug refrigerator back in and see if error clears after a power cycle.
- Consult your specific model’s user manual for any manufacturer‑provided troubleshooting steps (manuals available via user manual repositories).
Technician Only Technician diagnostics and repair for E0
- Power off and isolate the refrigerator from mains supply.
- Using a multimeter, check continuity of the ice maker’s temperature sensor/thermistor and confirm correct readings per service specifications.
- Inspect communication wiring between the ice maker module and main control board for breaks, corrosion, or poor connections.
- If sensor or ice maker control board is found defective, replace with OEM parts.
- Verify after replacement that error no longer appears and ice maker operates normally.
Parts needed: ice maker control module, thermistor/temperature sensor, wiring harness/connectors
- If error persists after basic checks and power‑cycling.
- If any wiring inspection reveals internal damage you are unsure how to safely address.
Next step
Choose the next step for E0
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Ice Maker Assembly
Automatically freezes and dispenses ice cubes inside the freezer compartment.
- Typical part-only price
- $75 - $160
- DIY difficulty
- Medium
- Estimated time
- 20-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10k ohms |
| part_number | W10316824 |
| voltage_rating | 120V AC |
Common Questions
What does E0 error mean on westinghouse refrigerator?
The E0 error indicates a communication fault, often related to the ice maker or its sensors.
Can I fix westinghouse refrigerator E0 error myself?
Yes, check the ice maker area for loose wiring and perform a power cycle.
How much does it cost to fix E0 error?
Repair costs range from $50 to $250, depending on parts and labor.
When should I call a technician for E0?
Call a technician if the error persists after your checks or if there's internal wiring damage.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!