Westinghouse Refrigerator Error CR

⚡ Quick Answer: The CR error code on your Westinghouse refrigerator indicates a communication failure between the control panel and the main control board. This issue... ✅ DIY Fixable

What Does Error CR Mean?

The CR error code on your Westinghouse refrigerator indicates a communication failure between the control panel and the main control board. This issue may manifest as a flashing temperature icon, a non-responsive control panel, and unusual clicking sounds. While the refrigerator may continue to operate, underlying auxiliary functions could be compromised, leading to cooling issues.

Common Symptoms:

  • Control panel display showing CR
  • Top temperature icon flashing on models with displays
  • Loss of communication between display/control panel and main board

Possible Causes

  • Communication failure between display/control panel and main control board (medium)

How to Fix Error CR

DIY Fix Basic Reset to Clear Communication Error

  1. Unplug the refrigerator from power.
  2. Wait approximately 5 minutes to allow capacitors to discharge.
  3. Plug the refrigerator back in and power it on.
  4. Observe if the CR error code returns.

Technician Only Inspect and Repair Communication Path Between Control Panel and Main Board

  1. Remove the refrigerator’s access panels to reach the control board and display/control panel.
  2. Inspect harness connectors between the control panel and main control board for loose connections, corrosion, or damage.
  3. Securely reconnect any loose connectors and replace any damaged wiring.
  4. If wiring and connectors are intact, test the main control board and display panel for faults using appropriate diagnostic tools.
  5. Replace faulty modules as needed.

Parts needed: Display/control panel assembly, Main control board, Wiring harness/connectors

🛑 When to Call a Pro:
  • If the CR error returns after a reset and you are not comfortable inspecting internal components.
  • If there is visible damage to wiring or circuit boards.
  • If multiple other error codes accompany the CR indicating deeper control system issues.

Next step

Choose the next step for CR

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Compressor Relay
resistance N/A
part_number WR07X10005
voltage_rating 120V AC

Common Questions

What does CR error mean on westinghouse refrigerator?

The CR error indicates a communication failure between the control panel and the main control board.

Can I fix westinghouse refrigerator CR error myself?

Yes, you can perform a basic reset by unplugging the refrigerator, waiting 5 minutes, and plugging it back in.

How much does it cost to fix CR error?

The estimated cost to repair the CR error ranges from $150 to $450.

When should I call a technician for CR?

Call a technician if the error returns after a reset, if you see visible damage, or if multiple error codes appear.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!