Westinghouse Oven Error F1
⚡ Quick Answer: The Westinghouse Oven F1 error code indicates a failure in the Electronic Oven Control (EOC) or control board. This malfunction may cause erratic disp... ✅ DIY Fixable
What Does Error F1 Mean?
The Westinghouse Oven F1 error code indicates a failure in the Electronic Oven Control (EOC) or control board. This malfunction may cause erratic display behavior, prevent the oven from heating, or result in the clock being the only visible indicator. If the F1 code appears, it typically signifies a critical issue requiring attention.
Common Symptoms:
- F1 code displayed on control panel
- Oven not heating or only clock/time showing
- Loss of normal oven functions
Possible Causes
- Electronic Oven Control (EOC) / Control board failure (high)
How to Fix Error F1
DIY Fix Perform basic reset and observation
- Ensure the oven is turned off and cool.
- Disconnect power at the mains or unplug the oven for 5–10 minutes.
- Restore power and check if the F1 code returns.
Technician Only Replace Electronic Oven Control (EOC) / Control Board
- Verify the model number and obtain the correct control board (EOC) for the specific Westinghouse oven model.
- Disconnect power to the oven at the mains.
- Remove the control panel or rear access panel to access the control board.
- Disconnect all connectors from the faulty control board and remove it.
- Install the replacement control board, reconnect all wiring, and reassemble panels.
- Restore power and test oven functions to confirm the error is resolved.
Parts needed: Electronic Oven Control (EOC) / Control board
- If the F1 error persists after power reset and simple checks.
- If you are not experienced with electrical repairs or removing internal oven components.
Next step
Choose the next step for F1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Control Board |
| resistance | N/A |
| part_number | WB27X11212 |
| voltage_rating | 120V AC |
Common Questions
What does F1 error mean on Westinghouse Oven?
F1 error indicates a malfunction in the Electronic Oven Control or control board, leading to heating issues.
Can I fix Westinghouse Oven F1 error myself?
Yes, you can try resetting the oven by unplugging it for 5-10 minutes to see if the error clears.
How much does it cost to fix F1 error?
Repair costs for the F1 error range from $150 to $400+, depending on parts and labor.
When should I call a technician for F1?
Call a technician if the F1 error persists after a power reset or if you're unfamiliar with electrical repairs.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!