Westinghouse Oven Error E16

⚡ Quick Answer: The Westinghouse Oven error code E16 indicates a potential malfunction in the heating element or related internal components. This error may manifest ... ✅ DIY Fixable

What Does Error E16 Mean?

The Westinghouse Oven error code E16 indicates a potential malfunction in the heating element or related internal components. This error may manifest as an unresponsive display or a failure of the oven to heat properly. Users are advised to perform a basic reset by unplugging the oven for 10-15 minutes and checking the selected cooking mode. If the error persists after these checks, further diagnosis by a technician may be necessary.

Common Symptoms:

  • Error code E16 displayed on oven control panel

Possible Causes

  • Heating Element

How to Fix Error E16

DIY Fix Basic checks for E16 on display

  1. Turn the oven off and unplug it for at least 10–15 minutes.
  2. After power‑down, plug the oven back in and attempt to reset any settings.
  3. Ensure correct oven mode selection (e.g., bake, grill) is made before starting a cook cycle.
  4. Observe if any fan noise or heating attempts occur when selecting functions.

Technician Only Technician diagnosis for E16 condition

  1. Inspect the oven control board and display module for fault indications with proper diagnostic tools.
  2. Check wiring harness connections to heating elements and internal fan assemblies for continuity and secure seating.
  3. Test internal components related to convection and fan circuits for faults.
  4. If applicable, verify whether thermal cutouts or safety interlocks in convection circuits have opened.
  5. Based on tests, consider replacing defective components such as failed elements, fan motors, or control boards.

Parts needed: control board, internal fan motor, convection heating elements, thermal cutoffs

🛑 When to Call a Pro:
  • If the code persists after power reset and basic user checks
  • If internal components indicate failure or unsafe conditions
  • If the oven fails to respond to normal control panel inputs

Next step

Choose the next step for E16

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-30 ohms
part_number WB44X200
voltage_rating 240V AC

Common Questions

What does E16 error mean on Westinghouse Oven?

E16 indicates a malfunction in the heating element or internal components, often causing heating failure.

Can I fix Westinghouse Oven E16 error myself?

Yes, try unplugging the oven for 10-15 minutes and ensure the correct cooking mode is selected.

How much does it cost to fix E16 error?

Repair costs can vary widely; control boards and internal parts may range from moderate to high depending on the model.

When should I call a technician for E16?

Call a technician if the error persists after a reset or if the oven fails to respond to controls.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!