Westinghouse Oven Error E13

⚡ Quick Answer: The Westinghouse Oven error E13 typically indicates a malfunction with the temperature sensor. This issue can lead to inconsistent temperature reading... ✅ DIY Fixable

What Does Error E13 Mean?

The Westinghouse Oven error E13 typically indicates a malfunction with the temperature sensor. This issue can lead to inconsistent temperature readings or prevent the oven from heating properly. It's important to check the oven's user manual for any troubleshooting steps and ensure the oven is correctly connected to power. If the problem persists, further investigation may be necessary.

Possible Causes

  • Temperature Sensor

How to Fix Error E13

DIY Fix Check for documentation and basic troubleshooting

  1. Refer to your specific Westinghouse oven’s official user manual to see if E13 is listed in the Troubleshooting or Fault Codes section.
  2. Ensure the oven is connected to proper mains power and reset it by switching off at the wall or breaker for 1–2 minutes then restoring power.
  3. Note any additional symptoms when the error appears (e.g., no heating, display flashing, at start or during use).
🛑 When to Call a Pro:
  • If the error persists after basic power reset and no information exists in your official oven documentation.
  • If the oven displays other abnormal behavior besides E13 (e.g., no heating, locks out).

Next step

Choose the next step for E13

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-1200 ohms at room temperature
part_number WB21X5301
voltage_rating 120V AC

Common Questions

What does E13 error mean on Westinghouse Oven?

E13 error indicates a malfunction in the temperature sensor, leading to erratic heating.

Can I fix Westinghouse Oven E13 error myself?

Yes, check your user manual for troubleshooting steps and try resetting the power.

How much does it cost to fix E13 error?

Repair costs for E13 error vary by model and region.

When should I call a technician for E13?

Call a technician if the error persists after a power reset or if other abnormal behaviors occur.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!