Vestfrost Refrigerator Error E01

⚡ Quick Answer: The Vestfrost refrigerator E01 error indicates a malfunction in the temperature sensor (NTC), which can lead to erratic temperature displays and inade... ✅ DIY Fixable

What Does Error E01 Mean?

The Vestfrost refrigerator E01 error indicates a malfunction in the temperature sensor (NTC), which can lead to erratic temperature displays and inadequate cooling. This error often appears shortly after powering on the unit. A faulty or disconnected temperature sensor, along with damaged wiring or connectors, can disrupt the main compartment's temperature sensing circuit, potentially preventing the compressor and fans from operating correctly.

Common Symptoms:

  • Display shows E01 shortly after power‑up
  • Refrigerator may stop cooling or show incorrect temperature readings
  • Compressor or fans may not start if the sensor fault is severe

Possible Causes

  • Faulty or disconnected cabinet temperature sensor (NTC) (medium)
  • Damaged or corroded sensor wiring/connectors (medium)

How to Fix Error E01

DIY Fix Initial checks and power reset

  1. Unplug the refrigerator from mains power for 5–10 minutes.
  2. Ensure it is properly plugged in and turned on.
  3. Observe if E01 returns after power restore.

Technician Only Inspect and test temperature sensor (NTC) and wiring

  1. Disconnect power and remove appropriate access panels to reach the main compartment temperature sensor.
  2. Visually inspect the sensor and wiring harness for damage or corrosion.
  3. Measure the NTC sensor resistance with a multimeter and compare to expected values for that model.
  4. Replace sensor if readings are outside specification or if damaged.
  5. Reseat or replace connectors/wiring as needed.

Parts needed: Temperature sensor (NTC), Wiring harness and connector

🛑 When to Call a Pro:
  • If error persists after sensor and wiring checks and replacement
  • If internal access for diagnostics is unsafe or beyond technical skill

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 10k ohms at room temperature
part_number Vestfrost 123456789
voltage_rating 120V AC

Common Questions

What does E01 error mean on Vestfrost refrigerator?

E01 indicates a malfunction in the temperature sensor, leading to incorrect temperature readings and cooling issues.

Can I fix Vestfrost refrigerator E01 error myself?

Yes, you can perform initial checks, including a power reset and inspecting connections.

How much does it cost to fix E01 error?

Repair costs for E01 range from $30 to $120 for sensor parts, with additional labor costs depending on service.

When should I call a technician for E01?

Call a technician if the error persists after checking the sensor and wiring or if internal diagnostics are unsafe.

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!