Vestfrost Dishwasher Error F8
⚡ Quick Answer: The F8 error code on your Vestfrost dishwasher indicates a drain pump malfunction, which may lead to unusual noises and failure to drain water properl... ✅ DIY Fixable
What Does Error F8 Mean?
The F8 error code on your Vestfrost dishwasher indicates a drain pump malfunction, which may lead to unusual noises and failure to drain water properly. This can be linked to water level control issues, such as overfilling or improper drainage. It's essential to check the water supply and drainage system to address the problem effectively.
Common Symptoms:
- Dishwasher stops mid‑cycle with F8 (often together with E4)
- Water level abnormality detected (too much water or improper drainage)
Possible Causes
- Drain Pump
- Clogged Drain Hose
- Faulty Control Board
How to Fix Error F8
DIY Fix Basic water level and drainage checks
- Ensure the water supply tap to the dishwasher is fully open.
- Check and clean the dishwasher’s bottom filter and remove any debris.
- Inspect the drain hose for kinks, blockages, or improper connection.
- Power‑cycle the dishwasher by turning it off at the mains for several minutes, then restart.
Technician Only Professional inspection of water inlet and sensor system
- Test the water inlet valve for proper operation and absence of leaks.
- Inspect the float switch or water level sensor for correct movement and electrical continuity.
- Verify drain pump and associated plumbing are functioning without blockages.
- Check wiring harness integrity around water level and sensor components.
Parts needed: Water inlet valve, Float switch / water level sensor, Drain pump
- If the error persists after basic user‑level checks
- If there is visible leakage or flooding around/under the dishwasher
- If internal components (valves, sensors, pump) need testing or replacement
Next step
Choose the next step for F8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | VF-DW-PUMP01 |
| voltage_rating | 120V AC |
Common Questions
What does F8 error mean on Vestfrost Dishwasher?
F8 indicates a drain pump malfunction, causing drainage issues and unusual noises.
Can I fix Vestfrost Dishwasher F8 error myself?
Yes, check the water supply, clean the filter, and inspect the drain hose for blockages.
How much does it cost to fix F8 error?
Repair costs vary by model and region; consult a technician for an estimate.
When should I call a technician for F8?
Call if the error persists after checks, if there's leakage, or if components need testing.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!