Toshiba Dryer Error E33
⚡ Quick Answer: The Toshiba Dryer E33 error code indicates a temperature sensor malfunction, which may cause the dryer to stop mid-cycle and not heat properly. This i... ✅ DIY Fixable
What Does Error E33 Mean?
The Toshiba Dryer E33 error code indicates a temperature sensor malfunction, which may cause the dryer to stop mid-cycle and not heat properly. This issue can arise from the temperature sensor being open or shorted, disrupting the drying process.
Common Symptoms:
- Dryer stops mid‑cycle
- Error code E33 displayed
- Dryer may not heat or complete drying
Possible Causes
- Temperature sensor malfunction (open or shorted) (low)
How to Fix Error E33
DIY Fix Basic checks before service
- Turn off and unplug the dryer.
- Check vent and lint filter for heavy buildup that can affect temperature regulation.
- Try restarting the dryer to see if the code clears.
Technician Only Inspect and replace temperature sensor
- Disconnect power and open access panels.
- Use a multimeter to test the temperature sensor for continuity and proper resistance values per service specifications.
- Inspect wiring between the sensor and control board for damage or loose connections.
- Replace a faulty temperature sensor and any damaged wiring.
- Reassemble and test dryer operation.
Parts needed: Temperature sensor (thermistor or thermostat depending on model), Wiring harness
- If the error persists after basic user checks.
- If there is smoke, burning smell, or overheating.
- If you are not familiar with safely testing or replacing internal electrical components.
Next step
Choose the next step for E33
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E33 error mean on Toshiba Dryer?
The E33 error indicates a malfunction with the temperature sensor, causing the dryer to stop and potentially not heat.
Can I fix Toshiba Dryer E33 error myself?
Yes, you can try basic checks like unplugging the dryer and inspecting the vent and lint filter.
How much does it cost to fix E33 error?
Repair costs for the E33 error range from ¥5,000 to ¥20,000, depending on parts and labor.
When should I call a technician for E33?
Call a technician if the error persists after your checks, or if you notice smoke or overheating.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!