Toshiba Air Conditioner Error 1E
⚡ Quick Answer: The Toshiba Air Conditioner 1E error signifies a communication failure between the indoor and outdoor units, often due to high discharge temperatures ... ✅ DIY Fixable
What Does Error 1E Mean?
The Toshiba Air Conditioner 1E error signifies a communication failure between the indoor and outdoor units, often due to high discharge temperatures detected by the outdoor TD sensor. This can lead to the unit stopping operation, with symptoms including the error display, potential overheating of the outdoor unit, and compressor shutdown for protection. Addressing this issue may involve inspecting the TD sensor, electronic expansion valve, or outdoor control board.
Common Symptoms:
- Unit stops operation with 1E displayed
- Detected discharge pipe/TD sensor high temperature
- Outdoor unit may shut down to protect compressor
Possible Causes
- High discharge temperature detected (medium)
- TD sensor or associated circuit malfunction (medium)
- Refrigerant issues (insufficient charge or cycle problem) (low)
How to Fix Error 1E
DIY Fix Basic checks before service call
- Turn off and restart unit to see if error persists
- Ensure outdoor unit airflow is unobstructed
- Check that filters are clean and no obvious ice or frost on pipes
- Note conditions when 1E appears (startup, high load)
Technician Only Technician diagnosis and corrective steps
- Measure actual discharge temperature at TD sensor
- Test TD sensor resistance and compare to spec
- Inspect TD detection circuitry and connector continuity
- Check refrigerant charge level and inspect for leaks
- Evaluate electronic expansion valve (if present) and high‑temperature conditions causing sensor trip
Parts needed: TD (discharge) temperature sensor, Electronic expansion valve (if applicable), Outdoor control board or wiring harness
- Repeated 1E display after basic power reset
- Outdoor unit appears excessively hot or smells of burnt components
- Visible refrigerant leak or frost on copper piping
Next step
Choose the next step for 1E
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
HVAC Control Board
Controls fan, compressor, sensor, and communication functions in the HVAC unit.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Air Conditioner parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Air Conditioner Fin Cleaner
For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.
Model-Compatible Washable AC Filter
A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 1200W |
|---|---|
| component | Control Board |
| resistance | 5-10 ohms |
| part_number | Toshiba 5D-118-001 |
| voltage_rating | 220V AC |
Common Questions
What does 1E error mean on Toshiba Air Conditioner?
The 1E error indicates a communication failure due to high discharge temperatures or sensor malfunctions.
Can I fix Toshiba Air Conditioner 1E error myself?
Yes, you can try turning off and restarting the unit, checking airflow, and cleaning filters.
How much does it cost to fix 1E error?
Repair costs range from ¥15,000 to ¥60,000, depending on parts and labor.
When should I call a technician for 1E?
Call a technician if the error persists after a reset or if you notice overheating or leaks.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!