Thermador Refrigerator Error E10

⚡ Quick Answer: The Thermador refrigerator E10 error indicates a malfunction in the power module's software or firmware. This can lead to inconsistent cooling and dis... ✅ DIY Fixable

What Does Error E10 Mean?

The Thermador refrigerator E10 error indicates a malfunction in the power module's software or firmware. This can lead to inconsistent cooling and disrupted control functions, resulting in the display showing 'E10' on the control panel. It's crucial to address this issue promptly to ensure proper operation.

Common Symptoms:

  • Refrigerator displays "E10" on the control panel.
  • Unit may stop normal operation or show disrupted functions tied to control logic.

Possible Causes

  • Power module software or firmware failure (medium)

How to Fix Error E10

DIY Fix Power cycle and check power stability

  1. Unplug the refrigerator from the electrical outlet or turn off the circuit breaker.
  2. Wait at least 5 minutes to allow internal systems to reset.
  3. Restore power and observe if the error clears.
  4. Ensure the household power supply is stable (no recent surges).

Technician Only Diagnose and repair power module firmware issue

  1. Connect a service diagnostic tool to read stored fault logs and confirm E10.
  2. Evaluate the refrigerator’s power module for firmware corruption.
  3. Reset, reflash, or replace the power module as needed.
  4. Verify correct operation after replacement and confirm no further error codes.

Parts needed: Power module / main control board

🛑 When to Call a Pro:
  • If the error persists after power cycling and stable power supply is confirmed.
  • If multiple error codes appear or if the refrigerator fails to cool properly after resolving the E10 display.

Technical Specifications

wattage
component Temperature Sensor
resistance 10k ohms at 25°C
part_number Thermador 00702800
voltage_rating 120V AC

Common Questions

What does E10 error mean on Thermador refrigerator?

E10 indicates a power module firmware failure, causing inconsistent cooling and control disruptions.

Can I fix Thermador refrigerator E10 error myself?

Yes, you can try power cycling the unit by unplugging it for 5 minutes to see if the error clears.

How much does it cost to fix E10 error?

Repair costs range from 200 to 600 USD, including parts and labor, depending on your region and model.

When should I call a technician for E10?

Call a technician if the error persists after power cycling or if multiple error codes appear.

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!