Thermador Oven Error F10
⚡ Quick Answer: The Thermador oven error F10 indicates a malfunction in the temperature sensor, often causing erratic temperature readings or improper heating. This e... ⚠️ Difficulty Varies
What Does Error F10 Mean?
The Thermador oven error F10 indicates a malfunction in the temperature sensor, often causing erratic temperature readings or improper heating. This error may occur during or after the heating cycle, leading to the oven shutting off or beeping. Possible causes include an over-temperature condition or a fault in the temperature sensing circuit, which may require inspection and testing of the sensor and wiring.
Common Symptoms:
- Oven display shows F10 and may shut off/beep
- Oven may not heat properly or stops heating
- May occur during or after heating cycle
Possible Causes
- Over‑temperature condition or incorrect temperature reading (medium)
- Faulty oven temperature sensor or sensor circuit (medium)
How to Fix Error F10
DIY Fix Basic checks and reset
- Turn off the oven and power at circuit breaker for a few minutes to reset control
- Allow oven to cool completely
- Turn power back on and see if error returns
Technician Only Inspect and test temperature sensor and wiring
- Disconnect oven from power
- Access the oven cavity and locate the temperature sensor probe
- Visually inspect sensor and wiring for damage or loose connections
- Use multimeter to measure sensor resistance and compare against expected values for that model
- Repair or replace sensor or wiring as indicated
Parts needed: Oven temperature sensor probe, Wiring harness/connectors
- If error persists after basic resets and symptom checks
- If oven overheats or behaves unpredictably
- If internal diagnostics or part replacements are needed
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | Thermador 00445556 |
| voltage_rating | 120V AC |
Common Questions
What does F10 error mean on Thermador oven?
The F10 error indicates a malfunction in the temperature sensor, causing heating problems and erratic temperature readings.
Can I fix Thermador oven F10 error myself?
Yes, you can try basic checks like resetting the oven and allowing it to cool down.
How much does it cost to fix F10 error?
The estimated repair cost for the F10 error ranges from $50 to $200, depending on parts and labor.
When should I call a technician for F10?
Call a technician if the error persists after resets, if the oven overheats, or if internal diagnostics are needed.
Sources & References
- Thermador Oven Error Codes Support Page (official)
- What Does F 10 Mean On A Stove? Diagnose & Repair (community)
Data last verified: 2026-03-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!