Thermador Oven Error E2
⚡ Quick Answer: The Thermador oven E2 error indicates a malfunction in the temperature sensor or its circuitry, causing inaccurate temperature readings or preventing ... ⚠️ Difficulty Varies
What Does Error E2 Mean?
The Thermador oven E2 error indicates a malfunction in the temperature sensor or its circuitry, causing inaccurate temperature readings or preventing the oven from heating properly. This issue may arise during preheating or cooking when the oven's temperature sensing fails, leading to display of the E2 code and possible shutdown of bake or broil functions.
Common Symptoms:
- E2 code displayed on the oven control panel
- Oven shuts off or refuses to start a bake/broil cycle when E2 appears
- May occur during heating or preheat when temperature sensing fails
Possible Causes
- Faulty oven temperature sensor (RTD probe) (medium)
- Loose or damaged sensor wiring/connector (medium)
- Control board sensor circuit fault (low)
How to Fix Error E2
DIY Fix Power reset and basic checks
- Turn the oven off and disconnect power at the circuit breaker or unplug it.
- Wait at least 2 minutes and restore power to see if the code clears.
- Ensure the oven door is fully closed and the sensor probe inside the cavity is visible.
Technician Only Diagnose and replace temperature sensor or repair wiring
- Disconnect power and remove access panels to locate the oven temperature sensor (usually a thin metal probe at the back upper wall).
- Use a multimeter to measure resistance of the sensor at room temperature; expected ~1050–1100 Ω. Replace sensor if out of spec.
- Inspect sensor wiring and connectors for continuity; repair any damaged wiring.
- If sensor and wiring are verified good, test control board sensor input circuit and replace control board if necessary.
Parts needed: Oven temperature sensor (RTD), Wiring harness/connectors, Electronic oven control board (if needed)
- If the error persists after power reset and basic checks.
- If you are not comfortable performing multimeter checks or working with oven internals.
- If replacing the temperature sensor and repairing wiring does not clear the code.
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | Thermador 00413500 |
| voltage_rating | 120V AC |
Common Questions
What does E2 error mean on Thermador oven?
E2 error indicates a temperature sensor malfunction, causing the oven to display inaccurate readings.
Can I fix Thermador oven E2 error myself?
Yes, you can perform a power reset and check the sensor wiring before seeking professional help.
How much does it cost to fix E2 error?
Repair costs can range from low to moderate for the sensor, while control board repairs tend to be higher.
When should I call a technician for E2?
Call a technician if the E2 error persists after basic troubleshooting or if you're uncomfortable with internal repairs.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!